EVALUATION KIT AVAILABLE MAX96711 14-Bit GMSL Serializer with High-Immunity/ Bandwidth Mode and Coax/STP Cable Drive General Description Benefits and Features The MAX96711 is a compact serializer with features espe- Ideal for Safety Camera Applications cially suited for automotive camera applications. In high- Works with Low-Cost 50 Coax (100 STP) Cables bandwidth mode, the parallel-clock maximum is 116MHz Error Detection of Video/Control Data for 12-bit linear or combined HDR data types. Line-fault High-Immunity Mode for Robust Control-Channel circuitry detects open/short faults on the link cable. EMC Tolerance The embedded control channel operates at 9.6kbps to Retransmission of Control Data Upon Error 2 2 Detection 1Mbps in UART, I C, and mixed UART/I C modes, allow- ing programming of serializer, deserializer, and camera Best-in-Class Supply Current: 93mA (max) Pre/Deemphasis Allows 15m Cable at Full Speed registers independent of video timing. 32-Pin (5mm x 5mm) TQFN Package with 0.5mm For driving longer cables, the IC has programmable Lead Pitch pre/deemphasis. Programmable spread spectrum is High-Speed Data Serialization for Megapixel available on the serial output. The serial output meets Cameras ISO 10605 and IEC 61000-4-2 ESD standards. The core Up to 1.74Gbps Serial-Bit Rate supply range is 1.7V to 1.9V, and the I/O supply range is 12.5MHz to 87MHz x 12-Bit + H/V Data 1.7V to 3.6V. 36.66MHz to 116MHz x 12-Bit + H/V Data The MAX96711 is available in a 32-pin (5mm x 5mm) (through Internal Encoding) TQFN package with 0.5mm lead pitch, and operates over Multiple Modes for System Flexibility the -40C to +115C temperature range. 9.6kbps to 1Mbps Control Channel in UART, 2 2 I C (with Clock Stretch), or UART-to-I C Modes Applications Crosspoint Switch Accepts Any Input Bitmap Automotive Camera Applications Modes for Encoded VSYNC and HSYNC Reduces EMI and Shielding Requirements Programmable Output Spread Spectrum Simplified Block Diagram Tracks Spread Spectrum Applied at the Parallel Input 1.7V to 3.6V I/O Supply VIDEO VIDEO Peripheral Features for Camera Power-Up and Verification CAM MAX96711 MAX96706 GPU Line Fault Detects Shorts to Ground/Battery and Open 2 2 I C I C Built-In PRBS Generator for BER Testing Dedicated GPO for Camera Frame-Sync Trigger and Other Uses Remote/Local Wake-Up from Sleep Mode Meets AEC-Q100 Automotive Specification -40C to +115C Operating Temperature Ordering Information appears at end of data sheet. 8kV Contact and 15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection 19-8471 Rev 2 2/17MAX96711 14-Bit GMSL Serializer with High-Immunity/ Bandwidth Mode and Coax/STP Cable Drive TABLE OF CONTENTS General Description ............................................................................ 1 Applications .................................................................................. 1 Benefits and Features .......................................................................... 1 Simplified Block Diagram........................................................................ 1 Absolute Maximum Ratings ...................................................................... 8 Package Information ........................................................................... 8 32-Pin TQFN-EP . 8 DC Electrical Characteristics ..................................................................... 9 AC Electrical Characteristics 12 Typical Operating Characteristics ................................................................ 15 Pin Configuration ............................................................................. 17 Pin Description ............................................................................... 17 Functional Block Diagram ...................................................................... 20 Detailed Description........................................................................... 25 Serial Link Signaling and Data Format . 25 Operating Modes . 25 Video/Configuration Link . 25 Single/Double Mode . 26 HS/VS Encoding . 26 Error Detection . 26 Bus Widths 26 Control Channel and Register Programming 30 Forward Control Channel . 30 Reverse Control Channel . 30 UART Interface 30 2 I C Interface 30 Remote-End Operation 30 Clock-Stretch Timing 30 2 Packet-Based I C . 30 Packet Protocol Summary 31 Control-Channel Error Detection and Packet Retransmission 31 GPO/GPI Control . 31 Spread Spectrum . 31 Cable Type Configuration . 31 Crossbar Switch 31 Video Timing Generator 31 Shutdown/Sleep Modes 33 Maxim Integrated 2 www.maximintegrated.com