Click here to ask an associate for production status of specific part numbers. Evaluates: SC1905 SC1905 Evaluation Kit General Description Benefits and Features The SC1905 evaluation kits (SC1905-EVKs) provide the Frequency Ranges: hardware and software graphical user interface (GUI) SC1905-EVK3400: 3300MHz3800MHz necessary for the evaluation of the SC1905. The SC1905 SC1905-EVK2400: 2300MHz2700MHz is a pin-compatible upgrade of the popular SC1894 RF SC1905-EVK1900: 1800MHz2200MHz PA linearizer (RFPAL) supporting signal bandwidths up RFin/RFout PA Linearizer SoC in Standard CMOS to 100MHz. The SC1905 is a fully adaptive, RFin/RFout Fully Adaptive Correction predistortion linearization solution optimized for a wide External Reference Clock Support: range of amplifiers, power levels, and communication 10MHz, 13MHz, 15.36MHz, 19.2MHz, 20MHz, protocols. The SC1905 uses the PA output and input 26MHz, and 30.72MHz signals to adaptively generate an optimized correction function in order to minimize the PAs self-generated Low Power Consumption: 1280mW distortion and impairments. Using RF-domain analog Frequency Range: 698MHz to 3800MHz signal processing enables the SC1905 to operate over Input Signal Bandwidth: 5MHz to 100MHz wide-signal bandwidths and consume very low power. Packaged in 9mm x 9mm QFN Package Benefits Operating Case Temperature: -40C to +105C Ease-of-Use Fully RoHS Compliant, Green Materials Integrated RFin/RFout Solution Ease-of-Use Reduces System Power Consumption, OPEX, and Integrated RFin/RFout Solution Total BOM Costs Reduced SW Development Smaller Power Supply, Heat Sink, and Enclosure Lower Backoff Reduces Transistor Costs Reduces System Power Consumption and OPEX Reduces BOM Costs, Area, and Total Volume Applications Smaller Power Supply, Heat Sink, and Enclosure 4G and 5G Cellular Infrastructure 2 Small Implementation Size (< 6.5cm ) Single/Multicarrier, Multistandard: WCDMA, LTE, and TD-LTE BTS Amplifiers, RRH, Booster Amplifiers, Ordering Information appears at end of data sheet. Repeaters, Small Cells, Microcells, Picocells, DAS, AAS, and MIMO Systems Wide Range of PAs and Output Power Amplifier: Class A/AB and Doherty PA Process: LDMOS, GaN, GaAs, and InGaP Any Application Requiring PA Linearization 319-100283 Rev 2 7/21 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 2021 Analog Devices, Inc. All rights reserved.SC1905 Evaluation Kit Evaluates: SC1905 Auxiliary Documentation Ordering Information SC1905 SPI Programming Guide is dedicated to PART DESCRIPTION describing how the host communicates with the SC1905 Evaluation Kit for SC1905-EVK3400 SC1905. It describes the communication protocol 3300MHz3800MHz in addition to the addresses of all the variables and SC1905 Evaluation Kit for parameters for monitoring the status and configuration SC1905-EVK2400 2300MHz2700MHz of the SC1905. SC1905 Evaluation Kit for The SC1905 Hardware Design Guide provides guidance SC1905-EVK1900 1800MHz-2200MHz on how to design the SC1905 into a system for example, recommendations on PCB layout, regulator Denotes a RoHS-compliant device that may include lead(Pb) and delay line selection etc. that is exempt under the RoHS requirements. The firmware release notes provide a comprehensive users guide to evaluate the SC1905 operation and performance with different power amplifiers. These auxiliary documents are available on the SC1905 product web page on Maxims website. Analog Devices 2 www.analog.com