TMC429-LI Analog Devices

MOTION CONTROLLER INTEGRATED CIRCUITS TMC429 Three Axis universal motion controller for stepper motor drivers MAIN CHARACTERISTICS INFO The TMC429 is a miniaturized low cost, high performance step- Minaturized low cost stepper motor control- ler for up to three independant axes per motor controller for up to three motors. It integrates all real Built in ramp generators time critical tasks in reliable, dedicated hardware: An integrated High-performance individual micro stepping motion ramp profile generator as well as an adaptable micro- (up to 64x) via built in sequencer step sequencer with microstep RAM table. Advanced stop- and SPI host interface with easy-to-use protcol reference switch handling allows for precise and fast referencing Step-/Direction or SPI driver interface as well as on-the-fly position checking. Automatic motor current On-the-fly alteration of target motion control gives high motor dynamics while saving energy. The parameters (e.g. position, velocity etc.) interrupt output can generate precise position pulses. perfect fit for (2-phase drivers) TMC260, The TMC429 is fully downwards compatible to the TMC428 and TMC262, TMC236, TMC246, TMC239, TMC249 and (3-phase drivers) TMC389 connects to the recent coolStep drivers (TMC260, TMC262 and Fullstep frequencies up to 20 kHz TMC389) via Step- & Direction signals (S/D) or to the classic Read-out of driver status TRINAMIC drivers TMC236, TMC239, TMC246 and TMC249 via INTERFACE Step & Direction outputs SPI. The communication with the host microcontroller is done easy-to-use SPI (20bit) with an extra SPI interface. The host just needs to do high- ELECTRICAL Power down mode (100 A) level control tasks, e.g. giving the command: Drive motor 2 to DATA 3.3V or 5V operation with CMOS/TTL position 1000. The TMC429 automatically calculates the motion compatible IOs ramp based on velocity and acceleration parameters. PACKAGE QFN32 5x5 mm chip size package SSOP16 or SOP24 with full TMC428 compatibility RoHS compliant ORDER CODE DESCRIPTION TMC429-I 3-axis controller SSOP16-package TMC429-PI24 3-axis controller SOP24-package TMC429-LI 3-axis controller QFN32-package www.trinamic.com for detailed information and datasheets 1X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for trinamic manufacturer: Other Similar products are found below : TMC2041-EVAL-KIT TMCM-3213 TMCM-343-H-TMCL PD86-3-1180-CANOPEN QSH6018-65-28-210 TMCS-40-KIT QSH8618-95-55- 700 TMC-UPS-10A70V-EVAL TMC-UPS-2A24V-EVAL TMC5031-EVAL-KIT PD42-2-1240-TMCL TMCM-1021 TMC424 PD57-2- 1060-TMCL TMCM-3230-CANOPEN TMCM-3312-TMCL TMCM-3313 TMC4330-EVAL PD-1141-CABLE PD42-2-1141 PD57-1-1160- TMCL PD60-3-1160-TMCL PD42-3-1241-CANOPEN TMCM-1241-CANOPEN PD57-1-1276-CANOPEN PD57-2-1276-CANOPEN PD57-2-1276-TMCL TMCM-1636-48V-TMCL QSH8618-96-55-700 TMCM-6214-TMCL QSH5718-51-28-101 QSH5718-76-28-189 TMCM-3212-CANOPEN TMCM-3214-CANOPEN TMCM-3214-TMCL TMCM-3215 TMCM-3312-CANOPEN TMCM-6210-CANOPEN TMCM-6210-TMCL TMCM-6212-CANOPEN TMCM-6213 PD42-1-1270-CANOPEN PD42-3-1140-TMCL PD42-3-1141 TMC261-BOB TMC8670-EVAL PD57-1-1276-TMCL PD60-3-1276-TMCL TMC-SCHRAUBSTOCK TMCM-BB1