TMCM-303 Analog Devices

Modules Standard Modules for Stepper Motors TMCM-303 3-Axis Controller / Driver Module 1.1A / 34V The TMCM-303 is a compact and versatile triple axis 2-phase stepper motor controller and Electrical data driver module. It provides a complete motion control solution at a very small size for em- up to 1.1A coil current RMS (1.5A peak) bedded applications. Using the integrated additional I/Os it even can do complete system 7V to 34V motor supply voltage control applications. The board can be connected to a baseboard or customized electron- 5V DC logic supply voltage ics with a pin connector. The TMCM-303 comes with the PC based software development environment TMCL-IDE. Using prede ned TMCL (Trinamic Motion Control Language) Supported motors high level commands like move to position or constant rotation rapid and fast develop- two-phase bipolar motors with ment of motion control applications is guaranteed. Host communication is possible via the 0.3A to 1.1A coil current serial UART interface (e.g. using a RS-232 or RS-485 level shifter) or via CAN. All time Interface critical operations, e.g. ramp calculation are performed on board. A user TMCL program can be stored in the on board EEPROM for stand-alone operation. The rmware of the RS232, RS485 or module can be updated via the serial interface. With the optional StallGuard feature it is CAN 2.0b host interface possible to detect overload and stall of the motor. inputs for reference and stop switches general purpose analog and digital I/Os Features up to 16 times microstepping memory for 2048 TMCL commands automatic ramp generation in hardware on the y alteration of motion parameters (e.g. position, velocity, acceleration) TM StallGuard option for sensorless motor stall detection full step frequencies up to 20kHz dynamic current control TRINAMIC driver technology: No heatsink required ORDER CODE DESCRIPTION Software TMCM-303 (-option) 3-axis controller/driver 1.1A/34V stand-alone operation using TMCL or TMCM-303/SG (-option) 3-axis controller/driver 1.1A/34V remote controlled operation with StallGuard PC-based application development soft- Related products: BB-303, TMCM-EVAL ware TMCL-IDE included Other OPTION 68 pin connector carries all signals - H horizontal pin connector (standard) RoHS compliant from 1 Januar 2006 - V vertical pin connector (on request) Size: 80x50mm For further detailed information and datasheets please refer to our website X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for trinamic manufacturer: Other Similar products are found below : TMC2041-EVAL-KIT TMCM-3213 TMCM-343-H-TMCL PD86-3-1180-CANOPEN QSH6018-65-28-210 TMCS-40-KIT QSH8618-95-55- 700 TMC-UPS-10A70V-EVAL TMC-UPS-2A24V-EVAL TMC5031-EVAL-KIT TMCM-6214-CABLE PD42-2-1240-TMCL TMCM-1021 TMC424 PD57-2-1060-TMCL TMCM-3230-CANOPEN TMCM-3312-TMCL TMCM-3313 TMC4330-EVAL PD-1141-CABLE PD42-2- 1141 PD57-1-1160-TMCL PD60-3-1160-TMCL PD42-3-1241-CANOPEN PD60-4-1076 PD57-1-1276-CANOPEN PD57-2-1276- CANOPEN PD57-2-1276-TMCL TMCM-1311 QSH5718-51-28-101 QSH5718-76-28-189 TMCM-3212-CANOPEN TMCM-3214- CANOPEN TMCM-3214-TMCL TMCM-3215 TMCM-3312-CANOPEN TMCM-6210-CANOPEN TMCM-6210-TMCL TMCM-6212- CANOPEN TMCM-6213 PD42-1-1270-CANOPEN PD42-3-1140-TMCL PD42-3-1141 TMC261-BOB TMCM-1241-CANOPEN TMC8670-EVAL PD57-1-1276-TMCL PD60-3-1276-TMCL TMC-SCHRAUBSTOCK TMCM-BB1