AND113GP And

Standard Bright LED Lamps Weight: 0.31 g Unit: mm AND113 AND113(P) Series Standard LED 5.0 0.2 T-1 3/4 Package (5 mm) Features Low power requirement Stand-off or ush-mount Cathode All plastic molded lens Index 0.5 Choice of 3 colors: GaPRed GaPGreen GaAsPYellow Optical Characteristics (T = 25C) 2.54 Cathode Index Axial Viewing Test Color Luminous Part Lens Angle 1 2 1. Anode Condition Intensity (mcd) 2. Cathode Number Desc. 2q 1/2 (I mA) F (deg) LED Lens Min. Typ. AND113(P) AND113G/GP Green Green Clear 20 50 10 30 AND113R/RP Red Red Clear 5 18 10 30 5.0 0.2 AND113S Red Red Clear 50 150 10 30 AND113Y/YP Yellow Yellow Clear 20 50 10 30 Absolute Maximum Ratings (T = 25C) A Rating Characteristics Symbol Unit Red Green Yellow 0.5 Forward Current AND113(P) 25 25 30 I mA F AND113S 30 V Reverse Voltage 555 V R Power AND113(P) 120 105 105 2.54 P mW D Cathode Index Dissipation AND113S 105 Operating Temperature T -40 to +85 C Opr 1 2 1. Anode 2. Cathode T Storage Temperature Range -40 to +85 C Stg Electro-Optical Characteristics (T = 25C) A Red Green Yellow Test Characteristics Symbol Unit Condition Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. V I = 20mA Forward Voltage 2.0 2.5 2.1 2.5 2.1 2.5 V F F I V = 5 V Reverse Current 10 10 10 A R R Peak Emission Wavelength I = 15mA AND113(P) l p 700 565 590 nm F AND113S 625 Spectral Line Half Width I = 15mA AND113(P) l 45 30 35 nm F AND113S 45 Precaution Please be careful of the following: 1. Soldering temperature: 260C max Soldering time: 3 sec. max Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation 720 Palomar Avenue Sunnyvale, CA 94086 2 Tel: 408.523.8200 Fax: 408.733.1287 email purdyelectronics.com www.purdyelectronics.com 1/5/98 2.5 max including resin 2.5 max including resin (1) (1) 7.6 0.5 0.5 5.8 0.2 5.8 0.2 26.5 7.6 1.5 12.75 0.5 1.5 21.1 Standard Bright LED Lamps Weight: 0.31 g Unit: mm AND114(P) Series AND114 Standard LED T-1 3/4 Package (5 mm) 5.0 0.2 Features Low power requirement Stand-off or ush-mount All plastic molded lens Cathode Index 0.5 Choice of 3 colors: GaPRed GaPGreen GaAsPYellow Optical Characteristics (T = 25C) Axial Luminous Viewing Test Color 2.54 Part Lens Intensity (mcd) Angle Condition Cathode Index Number Desc. 2q 1/2 (I mA) F LED Lens Min. Typ. (deg) 1 2 1. Anode 2. Cathode AND114G/GP Green Green Diffused 5 18 10 60 AND114R/RP Red Red Diffused 2 5 10 60 AND114(P) AND114S Red Red Diffused 20 50 10 60 AND114Y/YP Yellow Yellow Diffused 5 18 10 60 5.0 0.2 Absolute Maximum Ratings (T = 25C) A Rating Characteristics Symbol Unit Red Green Yellow Forward Current I AND114(P) 25 25 30 mA F 0.5 AND114S 30 V Reverse Voltage 555 V R Power Dissipation P AND114(P) 120 105 105 mW D 2.54 AND114S 105 Cathode Index Operating Temperature T -40 to +85 C Opr 1 2 1. Anode T Storage Temperature Range -40 to +85 C Stg 2. Cathode Electro-Optical Characteristics (T = 25C) A Red Green Yellow Test Characteristics Symbol Unit Condition Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. V I = 20mA Forward Voltage 2.0 2.5 2.1 2.5 2.1 2.5 V F F I V = 5 V Reverse Current 10 10 10 A R R Peak Emission Wavelength I = 20mA AND114(P) l p 700 565 590 nm F AND114S 625 Spectral Line Half Width I = 20mA AND114(P) l 45 30 35 nm F AND114S 45 Precaution Please be careful of the following: 1. Soldering temperature: 260C max Soldering time: 3 sec. max Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation 720 Palomar Avenue Sunnyvale, CA 94086 1/5/98 Tel: 408.523.8200 Fax: 408.733.1287 email purdyelectronics.com www.purdyelectronics.com 3 2.5 max including resin 2.5 max including resin (1) (1) 7.6 0.5 0.5 5.8 0.2 5.8 0.2 1.5 26.5 7.6 21.1 12.75 0.5 1.5