X-On Electronics has gained recognition as a prominent supplier of DPM8400A-2 Digital Panel Meters across the USA, India, Europe, Australia, and various other global locations. DPM8400A-2 Digital Panel Meters are a product manufactured by Anders Electronics. We provide cost-effective solutions for Digital Panel Meters, ensuring timely deliveries around the world.

DPM8400A-2 Anders Electronics

DPM8400A-2 electronic component of Anders Electronics
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.DPM8400A-2
Manufacturer: Anders Electronics
Category: Digital Panel Meters
Description: DPM, LED, DC VOLTMETER
Datasheet: DPM8400A-2 Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
1: USD 207.2711 ea
Line Total: USD 207.27 
Availability - 0
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0
Ship by Mon. 02 Dec to Fri. 06 Dec
MOQ : 1
Multiples : 1
1 : USD 207.2711

   
Manufacturer
Product Category
Brand
No. Of Digits / Alpha
Meter Function
Meter Range
Panel Cutout Height
Panel Cutout Width
Supply Voltage Min
Supply Voltage Max
Operating Temperature Min
Operating Temperature Max
Svhc
Display Technology
External Depth
External Length / Height
External Width
Led Colour
Operating Temperature Range
Power Consumption
Supply Voltage Dc Max
Supply Voltage Dc Min
Supply Voltage Range
Temperature Stability @
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the DPM8400A-2 from our Digital Panel Meters category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the DPM8400A-2 and other electronic components in the Digital Panel Meters category and beyond.

Image Part-Description
Stock Image ACM20-2-AC1-R-F-C
Digital Panel Meters 10A 85-264Vac Supply Frequency Reading
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 25.330.0453.1
Terminal Block Plug - Type 8113S/G - 5mm Pitch - 4 Position - Vertical - Marked - Volume (CM3): 23.900
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 25.521.3253.0
Terminal Strip For PCB - 2.5mm2 - 5.00mm - 2 Poles
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-20PC-3-GS-C
Digital Panel Meters 3.5 Digit +-200V Std Green
Stock : 7
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-EB-C
Digital Panel Meters Multipurpose board for DMS-30/40 meters
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-20LCD-1-DCM-C
Digital Panel Meters +8.0 to 50.0Vdc
Stock : 129
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 4400-01032-0
Murata Power Solutions Digital Panel Meters Crimp terminal for 12pin DMS Series
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image DMS-40PC-1-GS-C
Digital Panel Meters 4.5 Digit +-2V Input Std Green
Stock : 107
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LE-01
Electric energy meter; analogue,mounting; single-phase; Inom: 5A
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LE-01M
Electric energy meter; digital,mounting; for DIN rail mounting
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

digital panel modules user guide DPM 8000 Series-2 Voltmeters and Ammeters Models covered by this instruction sheet DPM8100-2 3.5 DIGIT 200mV DC DPM8100A-2 3.5 DIGIT 2V DC DPM8120-2 3.5 DIGIT 200mV AC DPM8120A-2 3.5 DIGIT 2V AC DPM8140-2 3.5 DIGIT 200mV True RMS AC DPM8400-2 4.5 DIGIT 200mV DC DPM8400A-2 4.5 DIGIT 2V DC DPM8420-2 4.5 DIGIT 200mV AC DPM8420A-2 4.5 DIGIT 2V AC The DPM8100-2 and DPM8400-2 series can be ranged as voltmeters or ammeters by fitting multiplier or shunt resistors (not include into the labelled positions on the main printed circuit board as shown on the OPERATING SPECIFICATION diagram overleaf. Wire linkJP1 may need to be removed for some Accuracy: 81xx: +/- 0.1% of rdg +/-1 digit (AC models +/- 0.2%) voltmeter ranges. 84xx: +/- 0.01% of rdg +/-2 digits DC models Using close tolerance resistors, the minimum of recalibration is required. 84xx: +/- 0.1% of rdg +/-3 digits AC models For accurate setting a calibrated supply should be used. The resistors Line voltage: 115/ 230 volts +10, -20%, 50 - 60 Hz fitted should be adequately rated for the current or voltage range. Temperature: 0 - 50 degrees C For non standard ranging and calibration, application sheet No. AES040 is available on request. Humidity: below 85% RH Over range is indicated by -1 on the display for 3.5 digit meters and by Power: 4VA flashing zero s on the 4.5 digit meters. Sampling rate: 2.5 / second STEP BY STEP INSTRUCTIONS 1 Remove instrument from its protective plastic bag and clip off TERMINAL DEFINITIONS front cover. SYMBOL DESCRIPTION 2 Pull off the three green safety terminals from the rear of the IN HI 1 meter. The complete panel meter assembly can now be Apply input to pins 1 and 2. If INLO signal is removed from its case by carefully levering the base of the greater than INHI the display will read -ive. 2 IN LO LED display board over the plastic retaining lug while pushing 3 n/c Not connected (unused) gently on the terminal pins at the rear. 4 Gnd (sig) digital 0 Volts (NOT MAINS EARTH) 3 With reference to the Range Specification table and notes overleaf, determine the resistance values to be fitted for the HOLD connect to terminal 6 (+5V) 8100 series 5 required voltage or current range. Further note whether link (display) connect to terminal 4 (0V) 8400 seriesJP1 should be removed. 6 +5V (o/p) internal +5V output (maximum 50mA) Carefully de-solder and remove link JP1 if necessary and solder the required resistors in place as shown on the main 7 230V circuit board diagram. 8 115V AC mains supply 4 The decimal point should be set as required by either 0V (N) 9 repositioning the PCB jumper link JP2 on the 3.5 digit models or setting a dip switch on the front of the 4.5 digit model, in one of these locations:- DIMENSIONS DP1 gives 1.999 i.e XXX DP2 gives 19.99 i.e. X. XX DP3 gives 199.9 i.e XX. X DP4 gives 1999.9 i.e XXX. X on 4.5 digit version only. 5 Slide panel meter back into its case along the guide rails taking care to ease bottom of LED display board over protruding lug. Then push the green safety terminals securely back into place on the rear of the meter. 6 Make electrical connection to the meter with reference to the Terminal Definition table. Note Mains Earth must NOT be INSTALLATION DIAGRAM connected to pin 4. There is no earth connection required with this meter. Note also that Pin 3 is unused. The instrument may now be tested. 7 For improved accuracy it can be adjusted by turning thespan ad potentiometer whilst applying full scale signal from a calibrated source until exactly full scale is shown on the display. On the DPM8140 and DPM8400 only, first set the display to read zero for 0V input using theoffse potentiometer on the front left hand side of the board. 8 Finally, clip the cover back on and insert the meter into the panel cut-out.Sna the mounting clips into the side of the case (refer to installation diagram) and tighten the fixing screws until secure in the panel - do not over tighten DPM8000-2 Rev 3 10/03VR2 PCB LAYOUT NOTES 1 To measure voltages above the meters basic sensitivity, attenuator resistors R17 and R18 need to be installed. The general equation to determine their values is given by: VIN = VD x (1 + R17/ R18) Where VIN is the input voltage required and VD is the corresponding display voltage. Note, VD max is actually 199.9mV for a nominal Decimal point 200mV basic sensitivity meter and 1.999V for a nominal 2V meter DIP switch on 4.5 digit Examples models VIN Display VD R17 R18 20V 19.99V 1.999V 1M 110K SPAN OFFSET Zero offset ADJUST addition. 10V 1500rpm 1.5V 1M 176K adjust (where fitted) For standard input ranges choose the corresponding resistors from VR1 VR2 the range specification table below. A to D Converter Chip 1 2 2 For inputs greater than 200V, R17 must be a high voltage resistor 3 such as Philips VR37 Series (1x2M2, 0.5W, RS164-8316) with JP2 Decimal point R18=2k2 Alternatively, use two carbon film resistors in series, such as select jumper Multicomp MCF (2x1M2, 0.5W, Farnell 262-195) with R18 as 2K4. on 3.5 digit See the options for R17 below. The maximum input voltage on this models range with correct resistors is 650V. 3 For ranges of 200V or less, for R17, use metal film resistors, 1%, 0.5W F1 as Farnell 545-314. For basic 200mV use only existing link JP1 4 For R18, on all voltage ranges, use metal film resistors, 1%, 0.25W Power supply LINK input fuse JP1 5 On current ranges, use metal film resistors, 0.5W for R30. The current, R17 100mA rated using internal shunt resistor R30 must not exceed 2 Amps. Leave link R18 (see Note 6) JP1 in place 6 The power supply input protection fuse is a 20mm cartridge type rated R30 at 250V / 100mA. 12 3 45 6 78 9 Options for Resistor R17 In In N/c 0v Hold +5V 230 115 0 Hi Vac Vac Vac Lo dc i/p dc 200mV and Ranges below Ranges above 200V current 200V Important Observe the mains Solder Warning: input connections Make no connection from pin 4 to mains earth under any R17 R17 R17 R17 conditions. Link JP1 Metal film Single Hi Two carbon resistor Voltage resistor film resistors RANGE SPECIFICATION MODEL NUMBER RESOLUTION BASIC RANGE OVERLOAD R17 R18 R30 LINK INPUT (of range required) SENSITIVITY REQUIRED PROTECTION JP1 IMPEDANCE 8100, 8120, 8140 100 V 200mV 0.2V 100V IN >I00M 8400, 8420 10 V 8100, 8120, 8140 1mV 200mV 2V 100V 1M 110K OUT 1M 8400, 8420 100 V 8100, 8120, 8140 10mV 200mV 20V 300V 1M 10K OUT IM 8400, 8420 1mV 1mV 8100A, 8120A 2V 2V 100V IN >I00M 8400A, 8420A 100 V 8100A, 8120A 10mV 2V 20V 100V 1M 110K OUT IM 8400A, 8420A 1mV 100mV 8100A, 8120A 2V 200V 10K 300V 1M OUT IM 8400A, 8420A 10mV 8100A, 8120A 1V 650V 2V 2M2 2K2 700V OUT 2M2 8400A, 8420A (see note 2) 100mV 0.1 A 8100, 8120, 8140 200mV 200 A Ik 1K IN 8400, 8420 10nA DO NOT 8100, 8120, 8140 1A EXCEED 2mA 100R IN 200mV IOOR 8400, 8420 0.1 A DISSIPATION RATING OF 10 A 8100, 8120, 8140 200mV 20mA SHUNT 10R IN IOR 8400, 8420 1A RESISTOR 100 A 8100, 8120, 8140 RC 200mA 1R IN 200mV IR 8400, 8420 10 A (SEE NOTE 5) 8100, 8120, 8140 1mA 2A 0R1 IN 200mV R1 (0.1) 8400, 8420 100 A DP8000-2 Rev3 10/03 anders electronics plc Bayham Place, London NW1 OEU UK Tel: +44 (0)20 7380 8167 Fax: +44 (0)20 7874 1908

Tariff Desc

8543.70.00 Other machines and apparatus Free
13 Signal processors (graphic equalisers, crossovers etc.) 91 Other Free

9027.10.00 Instruments and apparatus for physical or chemical analysis (eg, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Free

9031.80.00 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS Other instruments, appliances and machines Free

9030.31.00 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations.
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power Multimeters without a recording device Free

8473.30.00 Parts and accessories of the machines of 8471 AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ONTO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED:
.Other 71 No Weighing less than 1kg Free

8537 BOARDS, PANELS, CONSOLES, DESKS, CABINETS AND OTHER BASES, EQUIPPED WITH TWO OR MORE APPARATUS OF 8535 OR 8536, FOR ELECTRIC CONTROL OR THE DISTRIBUTION OF ELECTRICITY, INCLUDING THOSE INCORPORATING INSTRUMENTS OR APPARATUS OF CHAPTER 90, AND NUMERICAL CONTROL APPARATUS, OTHER THAN SWITCHING APPARATUS OF 8517:
8538 PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE APPARATUS OF 8535, 8536 OR 8537:
8538.10.10 22 For programmable controllers Free
Best RH02516R00FC02 Wirewound Resistors Retailer of India image

Sep 4, 2024
Discover why Xon Electronic is the top retailer of the RH02516R00FC02 Wirewound Resistor - Chassis Mount, a high-performance component by Vishay. Learn about its key features, including a 25-watt power rating, 16-ohm resistance, and 1% tolerance, and explore its applications in power supplies, moto
Best Retailer of Molex 39-01-2025 Headers & Wire Housings image

Aug 21, 2024
Discover why Xon Electronic is the best global retailer for the Molex 39-01-2025 Headers & Wire Housings, a 2 Circuit Receptacle Housing known for its reliability and durability. With a vast inventory, competitive pricing, and unparalleled technical support, Xon Electronic ensures timely delivery a
1.609.3200.51 Cable Glands by Hummel in India, USA image

Nov 10, 2024
The 1.609.3200.51 Cable Gland by Hummel, manufactured by SJK, is a high-quality M32 cable gland made from durable brass with a nickel-plated finish. Rated IP68, it ensures superior dust and water protection, making it perfect for industrial, marine, and outdoor applications in the USA, India, Aus
Best Selling Circuit Protection Products in USA, India, Australia image

Jul 11, 2024
Best circuit protection products available in the USA, India, and Australia, highlighting top electronic components from leading manufacturers like Schurter, C&K, Bourns, Mill-Max, Visual Communications Company, and Molex.

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronics Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified