Powerpole Connectors
- PP75: up to 120 Amps
PP75 series Powerpole housings can be used for wire-to-wire,
wire-to-board, and wire-to-busbar applications. Wire sizes
from #16 AWG (1.3 mm) to #6 (13.3 mm) offer power
capabilities up to 120 amps per pole. Locking housings offer
the capability to secure Powerpole housings to each other
and to mounting pads. Housings made from chemical
resistant (CR) resin withstand industrial solvents better than
PP75 with
Mounting Wings standard housings.
Large Wire Range Accommodates up to #6 (10mm) Wire
Reducing bushings allow as small as #16 (1.5 mm) wire to be used
Wire, PCB, and Busbar Contacts
Allows one connection system to meet multiple needs
Mini-Powerclaw PCB Contacts Minimize PCB Footprint
Removes the PP75 housing from the board side
| PP75 ORDERING INFORMATION |
PP75 Standard Housings
The second smallest Powerpole housing can be used with wire contacts
for up to 6 AWG [10mm] as well as PCB and busbar contacts.
Description ------- Part Numbers --------
[ 15.9 ]
Minimum Quantity ... 1,000 100 ......
0.62
[ 47.9 ]
Red 5916G7-BK 5916G7
1.88
Green 5916G6-BK 5916G6
[ 15.9 ]
[ 17.0 ]
Black 5916G4-BK 5916G4
0.62
0.67
White 5916G5-BK 5916G5
[ 81.3 ]
Blue 5916-BK 5916
3.20
Yellow 5916G15-BK 5916G15
Front View Mated Length
Orange 5916G14-BK 5916G14
Gray 5916G16-BK 5916G16
PP75 Chemical Resistant (CR) Housings
Has the same form and dimensions of the standard
PP75 housing in a chemical resistant PBT/ PC blend
Material ID V0 = Standard
housing. Suitable for use to -40C.
Located Here
P = Chemical Resistant
Description - Part Numbers -
Minimum Quantity ... 1,000 .......
Red P5916G7-BK
Black P5916G4-BK
White P5916G5-BK
Blue P5916-BK
PP75 Locking Dovetail Housings
Offers dovetails for stacking housings that have a locking feature to
prevent housings separating. Can mate to standard and chemical
resistant housings, but cannot be stacked with them.
Description ---------- Part Numbers -----------
Minimum Quantity .... 1,000 100 .....
Red 75LOKRED-BK 75LOKRED
[ 47.9 ]
Green 75LOKGRN-BK 75LOKGRN
1.88
Black 75LOKBLK-BK 75LOKBLK
White 75LOKWHT-BK 75LOKWHT
Blue 75LOKBLU-BK 75LOKBLU
Gray 75LOKGRA-BK 75LOKGRA
www.andersonpower.com
All Data Subject To Change Without Notice
- 30 -
SECTION 2
Powerpole PP75SECTION 2
Powerpole PP75
NEW
PP75 Premate Ground Housings
Offers a first-mate, last-break connection when stacked together with PP75
Mated Length
housings. Stacks together with PP75 standard and chemical resistant housings.
Housings are mechanically keyed to prevent cross mating with power positions.
[ 83.1 ]
Description ------- Part Numbers -------
3.20
Minimum Quantity.... 1,000 100 ...
Green 5927G6-BK 5927G6
PP75 Silver Plated Wire Contacts
Silver plated contacts offer the best electrical performance and durability up to
10,000 mating cycles. See reducing bushings in accessory section for smaller wires.
Dimensions
Mating Loose Piece - A -
[ 11.4 ]
AWG mm Force -- Part Numbers -- inches mm [ 30.0 ]
0.45
1.18
Minimum Quantity ........................ 1,000 100 ........................
A
6 13.3 Low 1307-BK 1307 0.22 5.59
6 13.3 High 5900-BK 5900 0.22 5.59
[ 7.2 ]
[ 7.1 ]
8 8.4 High 5952-BK 5952 0.19 4.83 0.28
0.28
12 to 10 3.3 to 5.3 Low 5953-BK 5953 0.14 3.56
12 to 10 3.3 to 5.3 High 5915-BK 5915 0.14 3.56
NEW
PP75 Premate Ground Wire Contacts
Silver plated contacts for use with the PP75 Premate Ground Housing. Rated to
[ 32.0 ]
1.26
10,000 mating cycles.
Dimensions
[ 11.9 ]
Loose Piece - A -
0.47
Type AWG mm ----- Part Numbers ----- inches mm
Minimum Quantity ........................ 1,000 100 ........................
Individual 6 13.3 1875G1-BK 1875G1 0.22 5.59 [ 7.2 ]
[ 7.1 ]
0.28
0.28
Individual 8 8.4 1875G2-BK 1875G2 0.19 4.83
Individual 12 to 10 3.3 to 5.3 1875G3-BK 1875G3 0.14 3.56
PP75 Silver Plated Busbar Contacts
Provide a quick disconnect input or output busbar connection. Busbar contacts are
for mating with wire contacts only. Part number 75BBS includes lock nuts. Locknuts
must be ordered separately for B01915P1.
See Busbar contact drawing on
[ 17.1 ]
Mating
0.68
website for further detail.
Type Thread Force ------------- Part Numbers --------------
Minimum Quantity ................. 1,000 20 10 ...
Busbar #10-24 High B01915P1 - 75BBS
[ 2.0 ]
Lock Nut #10-24 - H1216P8 110G54 -
0.08
[ 69.1 ]
2.72
55A Right Angle Standard Powerclaw PCB Contacts
Standard Powerclaw contacts are for use inside a PP75 housing and
provide a color coded right angle connection to the PCB.
Description --- Loose Piece Part Numbers --
[ 5.2 ] PP75 Housing
[ 17.0 ]
0.20
Minimum Quantity .. 500 100 ........ 0.67
Tin Plated PC5930T-BK PC5930T
[ 22.2 ]
Silver Plated PC5930S-BK PC5930S
0.87
[ 48.0 ]
Standard
1.89
See PCB contact
[ 66.0 ] Powerclaw
drawing on website 2.60
Contact
[ 32.8 ]
for further detail.
1.29
Second housing and contact
in two pole version only.
All Data Subject To Change Without Notice www.andersonpower.com - 31 -