1x4 Auxiliary Housing The new APP 1 x 4 Auxiliary connector is designed to Features mount into standard APP SBE160 / 320 and SBX175 / 350 connector housings. The 4 circuits support the Last make / First break Contacts transmission of battery status, charge and discharge Turns power on after power contacts are information for traction battery, fast charge and op- engaged, eliminating arcing during mating portunity charge applications. and unmating. Similar to the SBE and SBX connector series, the Multiple Contact Lengths 1x4 Auxiliary connector is robust and rated for Four male pin lengths are available to 10,000 mating cycles, more than twice DIN 43589-1 enable sequential mating / unmating of products. A new retaining clip is available for ease of auxiliary contacts. assembly and rapid eld maintenance. Gold Plated Mating Surfaces The genderless housing accepts PowerMod pin and Minimizes signal degradation. socket contacts with standard wire range from 12 to 20 AWG (2.5 to 0.5 mm). Contacts for smaller Hot Plug Rated to 5 Amps wire sizes are available by special order. PowerMod Allows for repair and maintenance of contacts are produced in high volumes and offer con- components without the need to power siderable savings versus auxiliary contacts for DIN down equipment. 43589-1 products. 1x4 auxiliary housing in an PBT Housing SBE160 / SBX175 housing Provides superior resistance to hydrocar- bons, solvents and resists damage from rough treatment. SPECIFICATIONS 1 x 4 Auxiliary Connector Speci cations Electrical Mechanical Current Rating - Amperes 12 AWG 14/16 AWG 16/20 AWG Life (UL)** 25A 20A 15A a. Mating Cycle (no load) 10,000 (CSA)** 20A 15A 10A b. Under Load (Hot Plug 250 Voltage Rating (AC/DC) 600* mating cycles 120V) 5A Dielectric Withstanding Voltage (AC) 2,200 Average Contact Retention Force * Average Contact Resistance (micro-ohms)* 300 (lbf)* 10 Contact Wire Range (AWG) 20 to 12 *** (N) 44.5 (mm) 0.50 to 2.5 *** Average Connect / Disconnect Operating Temperature (C) -20 to 105 Per 1x4 connector (F) -4 to 221 (lbf) 2.7 Flammability Rating of Housing Material UL94 V-0 (N) 12 Per contact Materials (lbf) 0.7 Housing Material PBT (N) 3 Pin Copper alloy, 10 inch Au over 50 Ni Socket BeCu, 30 inch Au over Ni Socket Body Copper alloy, 200 inch Sn Bright over Ni Retention Clip Stainless steel * Based on fully loaded connector (auxiliary contacts) ** Ratings based on largest wire or cable *** Stranding, IEC class 5 or lower HEADQUARTERS: Anderson Power Products, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 ASIA / PACIFIC: IDEAL Anderson Asia Paci c Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 TAIWAN: IDEAL Anderson Asia Paci c Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 www.andersonpower.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comORDERING INFORMATION (3) Auxiliary Pin Contacts Dimensions - (see gure 1) SBE160 / SBX175 Auxiliary Kits Kit includes: (1) auxiliary housing, (4) auxiliary contacts Part - Wire - - B - - C - - L1 - - L - (2 male pins standard length and 2 female sockets), (1) (1) Number AWG mm in. mm in. mm in. mm in. mm retention clip and (2) retaining pins. (2) Standard Length 7.7mm Part PM16P1620S30 16/20 1.5 / 0.50 0.07 1.7 0.11 2.8 0.30 7.7 0.77 19.6 Number Description PM16P1416S30 14/16 2.5 / 1.5 0.08 2.1 0.11 2.8 0.30 7.7 0.77 19.6 441G1 Kit 14 - 16 AWG contacts PM16P12S30 12 2.5 0.10 2.6 0.12 3.1 0.30 7.7 0.77 19.6 441G2 KIT 16 - 20 AWG contacts Pre-Mate 9.3mm 441G3 Kit 12 AWG contacts PM16P1620A30 16/20 1.5 / 0.50 0.07 1.7 0.11 2.8 0.37 9.3 0.83 21.2 PM16P1416A30 14/16 2.5 / 1.5 0.08 2.1 0.11 2.8 0.37 9.3 0.83 21.2 PM16P12A30 12 2.5 0.10 2.6 0.12 3.1 0.37 9.3 0.83 21.2 (3) SBE320 / SBX350 Auxiliary Kits Pre-Mate 8.5mm Kit includes: (1) auxiliary housing, (4) auxiliary contacts PM16P1620B30 16/20 1.5 / 0.50 0.07 1.7 0.11 2.8 0.33 8.5 0.80 20.4 (2 male pins standard length and 2 female sockets), (1) PM16P1416B30 14/16 2.5 / 1.5 0.08 2.1 0.11 2.8 0.33 8.5 0.80 20.4 retention clip and (2) retaining pins. PM16P12B30 12 2.5 0.10 2.6 0.12 3.1 0.33 8.5 0.80 20.4 Part Post-Mate 6.6mm Number Description PM16P1620C30 16/20 1.5 / 0.50 0.07 1.7 0.11 2.8 0.25 6.4 0.72 18.3 440G1 KIT 14 - 16 AWG contacts PM16P1416C30 14/16 2.5 / 1.5 0.08 2.1 0.11 2.8 0.25 6.4 0.72 18.3 440G2 KIT 16 - 20 AWG contacts PM16P12C30 12 2.5 0.10 2.6 0.12 3.1 0.25 6.4 0.72 18.3 440G3 Kit 12 AWG contacts Housing & Retention Clip Auxiliary Socket Contacts Dimensions - (see gure 2) Part Number Descriptionp Part - Wire - - B - - C - - L1 - - L - 444G1 1x4 auxiliary housing (1) Number AWG mm in. mm in. mm in. mm in. mm 445G1 Retention Clip SBE320 / SBX350 PM16S1620S32 16/20 1.5 / 0.50 1.7 0.07 2.8 0.11 N/A N/A N/A N/A 445G2 Retention Clip SBE160 / SBX175 PM16S1416S32 14/16 2.5 / 1.5 2.1 0.08 2.8 0.11 N/A N/A N/A N/A 110G9 Retaining pins SBE160 / SBX175 PM16S12S32 12 2.5 2.6 0.10 3.1 0.12 N/A N/A N/A N/A 110G59 Retaining pins SBE320 / SBX350 Retention Clip 19.6 1.06 0.77 B C B C 0.06 DIMENSIONS - in. mm 2.6 0.10 L1 1x4 Auxiliary Housings Retention Socket L For SBE160 / SBX175 Clip Insert Figure 1 Figure 2 For SBE320 / SBX350 Retention Clip Retaining Pin Tooling for Contacts Part - Wire - SBE/SBX Housing Number Mil-Standard Description p AWG mm Auxiliary Contacts TM0001 M22520/1-01 AF8 hand tool 20 / 12 0.5 / 2.5 Top View Mated View TP0001 N/A WA27F pneumatic crimp tool 20 / 12 0.5 / 2.5 1.3 TL0004 M22520/1-03 Turret & locator for TM0001 & TP0001 20 / 12 0.5 / 2.5 41.2 R 0.05 PM1000G1 N/A Four Indent Hand Tool 20 / 12 0.5 / 2.5 1.62 (2) PLCS PM1001G1 N/A Semi automatic loose piece crimp machine 20 / 12 0.5 / 2.5 PM1002G1 N/A Contact insertion tool PM1003G1 N/A Contact extraction tool 9.9 24.6 0.39 0.97 Side View Front View 3.7 0.15 7.9 (1) Stranding, IEC class 5 or lower 10.9 0.31 0.43 (2) Provided in standard kits (3) Retaining pins are to be used instead of retention clip when handle with latch is being used 15.8 NOTE: All auxiliary contacts are last make / rst break, in relation to power contacts. 0.62 All Data Subject To Change Without Notice 14755 DS-1X4 REV02 HEADQUARTERS: Anderson Power Products, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 ASIA / PACIFIC: IDEAL Anderson Asia Paci c Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 TAIWAN: IDEAL Anderson Asia Paci c Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 www.andersonpower.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com