RoHS Recast Compliant Industrial MicroSD 6.1 CV110-MSD Product Specifications (Toshiba TLC BiCS3 64 Layers) February 22, 2019 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: Fully Compatible with SD Card Temperature Range Association Specifications Operating: Physical Layer Specification Ver6.1 Standard: -25C to 85C Security Specification Ver4.0 Wide: -40C to 85C Capacity Storage: -40C to 85C 32, 64, 128, 256 GB Operating Voltage: 2.7V ~ 3.6V Performance* Power Consumption* Sequential read: Up to 90 MB/sec Operating: 105 mA Sequential write: Up to 34 MB/sec Standby: 185 A Random read (4K): Up to 1,300 IOPS Bus Speed Mode: Support Class 10 with UHS-I Random write (4K): Up to 42 IOPS and UHS-3** Flash Management SDR12: SDR up to 25MHz 1.8V signaling Built-in advanced ECC algorithm SDR25: SDR up to 50MHz 1.8V signaling Global Wear Leveling SDR50: 1.8V signaling, frequency up to 100MHz, up to 50 MB/sec Flash bad-block management SDR104: 1.8V signaling, frequency up to DataRAID 208MHz, up to 104MB/sec S.M.A.R.T. DDR50: 1.8V signaling, frequency up to SMART Read Refresh 50MHz, sampled on both clock edges, up to 50 MB/sec NAND Flash Type: Toshiba TLC BiCS3 64 Layers Physical Dimensions 15mm (L) x 11mm (W) x 1mm (H) SD-Protocol Compatible Supports Video Speed Class: CL10 Supports SD SPI Mode RoHS Recast Compliant Backward Compatible with 3.0 and 2.0 Endurance (in Terabytes Written: TBW) 32 GB: 82 TBW 64 GB: 163 TBW 128 GB: 312 TBW 256 GB: 614 TBW *Performance values presented here are typical and measured based on USB 3.0 card reader. The results may vary depending on settings and platforms. **Class 10 with UHS-I is supported on 32GB while Class 10 with UHS-3 is supported on 64-256GB timing in 1.8V signaling is different from that of 3.3V signaling. 1 2019 Apacer Technology Inc.