11000 and 12000 series Professional toggle switches Distinctive features Applications These switches are specially manufactured for defence, avionics, space and A telecommunications applications. Approvals and lists CECC 96201-005 CECC 96201-008 QPL (in Europe) and MUAHAG listed meeting the requirements of MIL standard (MIL 3950) Robust switches for high specification environments Toggle action on 2-position models giving smooth mechanical operation Plastic material with high insulation resistance Several front panel sealing options Several locking lever options (12000 series) Bright chrome, satin chrome or matt black finish APEM www.apem.com A-6311000 series Professional toggle switches - threaded bushing 6,35 (1/4) Specifications ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Peak currents, refer to Special options. - silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC - gold contacts (D) : 200mA 250VAC - 400mA 125VAC Minimum load : AD2-X780-D contacts : 10mA 50mV, 10A 5V min. Initial contact resistance : 10 m max. Insulation resistance : 1.000 M min. at 500VDC Dielectric strength : A 1.000 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between poles and between terminals and frame Contact bounce : 2 ms max. Electrical life at full load : Number of cycles Contacts Max. current/voltage rating 2 positions 3 positions A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000 AD2 2A 250VAC - 4A 125 VAC - 4A 30VDC 20.000 20.000 X780 (Gold plating : 100mA 30VDC max.) D 200mA 250VAC - 400mA 125VAC 80.000 50.000 Low level or mechanical life 150.000 100.000 MATERIALS GENERAL SPECIFICATIONS Case : diallylphthalate (DAP) Torque :1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts Actuator : brass, chrome plated Standard panel thickness : 2,5 mm (.098) max. Bushing : brass, nickel plated Operating temperature : -40C to +85C Housing : brass, nickel plated Contacts A : silver AD2 : gold plated silver RELIABILITY - RUN-IN TEST (2 microns gold) Upon request, each individual switch can be submitted to a low level run-in X780 : solid rivet - gold plated test of 50 or 250 cycles to ensure suitability for special applications requiring silver/nickel alloy a very high level of reliability (military, space, etc.). D : solid gold rivet X910 : silver/nickel alloy (for peak currents, see Special AGENCY APPROVALS/PREFERENTIAL LISTS options) Terminal seal : epoxy CECC 96201-005 Note : AD2 and X780 contacts CECC 96201-008 can be used for high level QPL (Europe only) applications. In this case, the MUAHAG gold layer is considered only as a protection against oxidation Availability : consult factory for details of approved models. during storage. Marking : to order switches marked CECC, complete appropriate box of ordering format. Preferential lists do not appear on the switches. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 25 pieces or 50 pieces depending on models. A-64 www.apem.com APEM