4600-4400 series Toggle switches DISTINCTIVE FEATURES High current/voltage rating in a small case Butt action contacts Insulated or metal lever UL, CSA and VDE (EN 61058-1) approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 4 A 250 VAC - 6 A 125 VAC Approved electrical ratings : see table below Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 2,500 Vrms 50 Hz min. between poles and between terminals and frame Electrical life : 10,000 cycles at full load Approvals Models Poles Functions Approved Ratings UL/CSA 4600A 1-2 1-6-9 3 A 250 VAC - 6 A 125 VAC 4400A 1-2 1-6 4(2) A 250 VAC VDE (EN 61058-1) 4600A 1-2-3 1-6 4(2) A 250 VAC GENERAL SPECIFICATIONS Torque : 0.95 Nm (.70 Ft.lb) max. applied to nut Panel thickness : 5 mm (.196) between 2 nuts Operating temperature : -20 C to +55 C (-40 F to +131 F) Hand soldering : 270 C (518 F) max. for 10 seconds max. - iron 3 (.118) MATERIALS Case : melamine phenolic Actuator : - insulated : polyamide 6-6 - non-insulated : brass, nickel plated Bushing : - insulated : polyamide 6-6 - non-insulated : brass, nickel plated Contacts : silver APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-4600-4400-1711 PANEL SWITCHES4600-4400 series Toggle switches PANEL CUT-OUT AGENCY APPROVALS EN 61058-1 Availability : see above chart. Marking : VDE approved models are standard marked. To order switches marked UL-CSA, complete appropriate box of ordering format. TERMINALS 1.20 (.047) 2.80x0.50 1.20x0.5 (.047x.019) (.11x.019) Solder lug / quick-connect Straight PC ELECTRICAL FUNCTIONS KEYWAY 3 2 1 2 PANEL SWITCHES 7.20 (.283) 2.40 (.094) 5.00 (.196) 6.20 (.244)