55636AVDEULCSA+U272 Apem

07-Serie 55000-A 07-Serie 55000-A 30/10/14 15:10 Page51 55000 series VDE approved toggle switches The switches described below are marked VDE as standard. UG1410A UL and CSA agency approvals are also available. To order a switch marked EN 61058-1 UL or CSA, please complete Agency approval box. A MATERIALS ELECTRICAL SPECIFICATIONS Class I (normal insulation) Contacts : silver Small contact opening : (< 3 mm (.118)) Case : diallylphthalate (DAP) Current/voltage rating with resistive load : 3A 250VAC - 6A 125VAC Actuator : brass, chrome plated Dielectric strength : with insulating vinyl cap 2.000 Vrms 50 Hz min. between poles and between terminals and frame Bushing : brass, nickel plated 1.000 Vrms 50 Hz min. between terminals Housing : stainless steel Special body for increased creepage distance and air gap : 3 mm (.118) Terminal seal : epoxy Further specifications, see 5000 series. GENERAL SPECIFICATIONS Insulating cap, compulsory, supplied glued on the lever : U270 for models 55600A, 55200A and 55200ZA U1040 for models 55200WA and 55200WA X433 Ground connector : U721 compulsory if the panel is not metallic or not connected to ground Epoxy sealed terminals standard MODEL STRUCTURE Keyway Solder lugs III II I 6.35-40UNS 4.00 III II I (1/4-40UNS) (.157 DIA) 24 2-3 1-2 5-6 4-5 Single pole Double pole 55636A 55646A ON - ON 55639A 55649A ON OFF ON 4.75 1 2 3 1.80 (.187) 4.70 (.070) (.185) 7.00 12.00 (.275) 13.20 (.472) (.519) EPOXY Also available with 6 mm (.236) bushing : 55500. Keyway Straight PC terminals III II I 6.35-40UNS 4.00 (1/4-40UNS) (.157 DIA) III II I 24 2-3 1-2 5-6 4-5 1.60 Single pole Double pole (.062 DIA) 55236A 55246A ON - ON 55239A 55249A ON OFF ON 1 2 3 4.75 (.187) 4.70 (.185) 1.10 4.75 12.00 (.187) (.043) 7.00 13.20 (.472) (.275) (.519) EPOXY Also available with 6 mm (.236 ) bushing : 55100. The company reserves the right to change specifications without notice. APEM www.apem.com A-51 11.00 (.433) 11.00 (.433) 4.00 13.30 (.157) (.523) 2.00 8.00 11.50 2.00 (.078) (.314) (.452) (.078) 8.00 11.50 (.314) (.452) 1.00 (.039) 1.00 (.039) 3.30 14.00 (.129) (.551) 3.70 12.00 (.145) (.472) 4.70 4.70 (.185) (.185)07-Serie 55000-A 07-Serie 55000-A 30/10/14 15:10 Page52 55000 series VDE approved toggle switches Right angle terminals - horizontal 5.08 6.25 4.00 (.200) (.246 DIA) (.157 DIA) I IIIII III II I 24 3.70 2-3 1-2 (.145) 4.70 5-6 4-5 (.185) Single pole Double pole* 1.60 (.062 DIA) 55236WA 55246WA X433 ON - ON A 55239WA 55249WA X433 ON OFF ON 5.08 (.200)X433 to be placed in the third box of ordering format. 3 21 4.70 (.185) 12.00 7.00 (.472) (.275) 13.20 4.70 (.519) (.185) EPOXY Also available for VERTICAL mounting (on request). Keyway Quick-connect terminals 6.35-40UNS 4.00 (1/4-40UNS) (.157 DIA) III II I 24 2-3 1-2 Single pole 55236Z ON - ON 55239ZA ON OFF ON 12 3 4.70 (.185) 1.57 (.061) 7.00 13.20 (.275) (.519) EPOXY * In double pole W models, spacing PANEL CUT-OUT between poles on PCB is different from standard : 4,7 mm (.185) instead of Bushing 6,35 (1/4) Bushing 6 (.236) 6.50 2.20 3,81 mm (.150) 2.20 6.20 (.255 DIA) (.086 DIA) (.086 DIA) (.244 DIA) 6.20 5.20 (.244) (.204) LEVERS Blank Blank -4N For threaded bushing models For plain bushing models For use with paddles only Cap U270 compulsory Cap U1040 compulsory A-52 www.apem.com APEM 13.50 (.531) 11.00 (.433) 9.00 (.354) 11.50 (.452) 1.00 (.039) 6.00 14.50 (.236) (.570) 12.70 7.40 (.500) (.291) 1.10 1.00 (.043) (.039) 2.00 11.00 6.00 14.50 (.078) (.433) (.236) (.570) 8.00 11.50 (.314) (.452) 1.00 (.039) 4.70 12.70 7.40 12.00 (.185) (.500) (.291) (.472) 4.70 12.70 12.70 5.30 13.10 (.185) (.500) (.500) (.208) (.515) I II III