55639AVDE+U272 Apem

55000 series VDE approved miniature toggle switches threaded or plain bushing DISTINCTIVE FEATURES VDE marked as standard UL and CSA approvals also available Single and double pole configurations ELECTRICAL SPECIFICATIONS Class I (normal insulation) Small contact opening : (< 3 mm (.118)) Current/voltage rating with resistive load : 3 A 250 VAC - 6 A 125 VAC Dielectric strength : 2,000 Vrms 50 Hz min. between poles and between terminals and frame 1,000 Vrms 50 Hz min. between terminals Special case for increased creepage distance and air gap : 3 mm (.118) GENERAL SPECIFICATIONS Insulating cap, compulsory, supplied glued on the lever : U270 for models 55600A, 55200A and 55200ZA U1040 for models 55200WA and 55200WA X433 Ground connector : U721 compulsory if the panel is not metallic or not connected to ground Epoxy sealed terminals standard MATERIALS Contacts : silver Case : diallylphthalate (DAP) Actuator : brass, chrome plated with insulating vinyl cap Bushing : brass, nickel plated Housing : stainless steel Terminal seal : epoxy FURTHER SPECIFICATIONS : see 5000 series. The company reserves the right to change specifications without notice. 1 SW-55000-2104 PANEL SWITCHES55000 series VDE approved miniature toggle switches threaded or plain bushing AGENCY APPROVALS EN 61058-1 Complete appropriate box of ordering format. ELECTRICAL FUNCTIONS KEYWAY 1 2 3 PANEL CUT-OUT 6.50 2.20 2.20 6.20 (.255 DIA) (.086 DIA) (.086 DIA) (.244 DIA) 6.20 5.20 (.244) (.204) Bushing 6.35 (1/4) Bushing 6 (.236) 2 PANEL SWITCHES