905555 Apem

USB Joystick Interface The Apem Components USB Joystick Interface is designed to connect a Joystick with up-to 3 analogue axes, 16 buttons and 4 LEDs to a USB port on a PC or Mac. We have utilised a JoyWarrior controller chip from Code Mercenaries for controlling the USB interface. The interface is fully USB V1.1/2.0 and HID 1.1 compliant. It is compatible with standard system drivers, so no special drivers are required. There are 3 analogue inputs for X, Y and Z axes with 10 bit resolution and connections for up-to 8 directly connected pushbuttons or 16 in a matrix. There are 4 outputs for driving auxillary functions. The most common application would be for driving LED indicators. Apem manufacture a huge range of LED indicators, (Apem Q Series) and switch products. Please refer to www.apem.com for full details. The interface board measurements and mounting points are shown below: Pin 1 CONN2 Micro USB 4 off 3.5 dia holes USB Connector Pin 1 Connector For 3000 Series Joystick Pin 1 3 44 Pin 1 CONN1 50 USB connection is made via either a 5 way 2.54mm pitch Molex KK style header or a Micro USB type B socket on the board. A suitable USB cable (1.5m long) is included. The joystick connects to Conn1, a 14 way 2.54mm pitch Molex KK style header. A separate 9 way connector is fitted to allow direct connection of a 3000 Series Joystick having a standard connector. 4 open drain outputs are also available on a 5 way Molex KK style header to enable you to drive LEDs. Please refer to the pin-outs below: Conn 2 (USB) : Pin 1 +5V Note: The 4 external mounting holes are Pin 2 D- connected to the USB cable screen Pin 3 D+ Pin 4 0V Pin 5 Screen 908888A-01 Datasheet Version 2 50 44 3 Output ConnectorOutput Connections: 470R 5 Output 1 4 Output 2 3 Output 3 2 Output 4 1 +5V Each Output is capable of driving 50mA (up to a total of 70mA for all 4outputs) 3000 Series Joystick Connector: 3000 Series without Pushbutton 1 0V 2 Not connected Z Y X 3 Z Axis Cut Lug From Joystick 4 Y Axis Connector Housing 5 X Axis 6 +5V 7 Not Connected 8 Switch Switch 1 (Link 1 Made) 3000 Series with 9 Switch Pushbutton Conn 1 Joystick: Direct Matrix Switch Switch Connection Connection Link 1 for 8 switches for 16 switches (Link 1 Made) (Link 1 Not Made) 1 2 3 4 6 7 8 5 Z 9 10 11 12 Y A diode is needed in series with each switch on matrix. 13 14 15 16 Z X Y X Version 2 1 +5V 2 X Axis 3 Y Axis 4 Z Axis 5 Switch 1 6 Switch 2 7 Switch 3 8 Switch 4 9 Switch 5 10 Switch 6 11 Switch 7 12 Switch 8 13 0V 14 Screen 1 +5V 2 X Axis 3 Y Axis 4 Z Axis 5 Switch Row 1 6 Switch Row 2 7 Switch Row 3 8 Switch Row 4 9 Switch Column 1 10 Switch Column 2 11 Switch Column 3 12 Switch Column 4 13 0V 14 Screen