CT46021N000 Apem

CT series Sealed toggle switches Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load and electrical life at full load: Case : mineral filled polyester see table below UL94-V0 Initial contact resistance : 10 m max. at 1A 2VDC Bushing and cover : zamac Insulation resistance : 1.000 M min. at 500VDC Actuator : bright nickel Dielectric strength : 2.500 Vrms 50 Hz min. between terminals Contacts : silver alloy 3.000 Vrms 50 Hz min. between terminals and frame Gold plated : on request ELECTRICAL RATING AND LIFE FUNCTIONS Alternate current Direct current UL AGENCY APPROVAL ON-OFF 15A 125/250VAC 15A 28VDC resistive and resistive 5A 28VDC lamp load File E83438 ON-ON 10.000 cycles 10.000 cycles 10.000 cycles, T20C Availability : consult factory for 10A 125/250VAC Other 15A 28VDC resistive details of approved models. resistive functions 15A 28VDC inductive 10.000 cycles 10A 125/250 VAC Marking : to order switches 5A 28VDC lamp load marked UL, complete appropriate according to ON-OFF 15A 125/250VAC 15A 28VDC resistive box of ordering format. UL 1054 and resistive 5A 28VDC lamp load ON-ON 10.000 cycles 10.000 cycles 10.000 cycles, T20C 10A 125/250VAC Other 15A 28VDC resistive resistive functions 15A 28VDC inductive 10.000 cycles 5A 28VDC lamp load GENERAL SPECIFICATIONS Torque : 2 Nm (1.47 Ft.lb) max. applied to nut Panel thickness : see Mounting Accessories on the following pages Mechanical life : 100.000 cycles Operating temperature : -40C to +85C Front panel sealing : IP67 APEM www.apem.com 1 DOUBLE POLE SINGLE POLECT series Sealed toggle switches Overview CT SERIES Number of poles Electrical functions Terminals Electrical functions (continued) 3 Single pole 1-0 ON - OFF 5-0 ON - MOM 0 Screw 4 Double pole 2-0 ON - m.OFF 6-0 ON - ON 2 Solder lug/quick-connect 3-0 OFF - MOM 3 Normalized quick- 7-0 MOM OFF MOM 3 4 4-1 ON ON ON connect 8-0 ON OFF MOM 3 4 4-2 ON ON MOM 9-0 ON OFF ON 3 4 4-3 MOM ON MOM Function 4 : double pole only 0 Lever styles Lever finish Locking lever Agency approval Accessories 0 None 1 Standard, length 17,5 mm N Bright nickel 0 No locking 0 2 hex nuts, 1 locking 2 UL (.688) ring and 1 lockwasher 2 2 hex nuts and 1 sealing washer APEM has the ability to develop custom configurations. Please contact us with your requirements. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - their options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Security caps are available to prevent inadvertent lever operation. On request. Packaging unit : 25 pieces 2 www.apem.com APEM