CW-B1GY1A00A0 Apem

CW series Proportional miniature thumb controls non-contacting Hall effect technology DISTINCTIVE FEATURES Single axis Analog or PWM outputs Spring return to center Snap-in mounting Designed for joysticks, armrests and panel mounting ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -40 C to +85 C (-40 F to +185 F) Storage Temperature: -40 C to +85 C (-40 F to +185 F) Sealing: No sealing EMC Immunity Level: EN61000-4-3 EMC Emissions Level: EN61000-6-3: 2001 ESD: EN61000-4-2 ELECTRICAL SPECIFICATIONS Technology: Hall effect sensor Supply Voltage Range: 5.00 VDC 0.01 VDC Ratiometric output options: See options Reverse Polarity max: -10 VDC Transient overvoltage max: 16V Overvoltage max: 16 V Output Impedance: 2 Return to Center Voltage Tolerance: 200 mV initial MECHANICAL SPECIFICATIONS Operating Force: 0.7 N (0.15 lbf) Maximum Vertical Load: 111 N (25 lbf) Maximum Horizontal Load: 67 N (15 lbf) Mechanical Angle of Movement: 45 Expected Life: 3 million lifecycles Mass/weight: 4.2 g 1.0 g (0.15 oz 0.03 oz) Lever Action (centering): Spring U.S. Patent D767,685 S U.S. Patent D740,886 S The company reserves the right to change specifications without notice. 1 JST-CW-1903 JOYSTICKSCW series Proportional miniature thumb controls non-contacting Hall effect technology MOUNTING MATERIALS Body: Delrin PANEL CUTOUT Actuator: Glass filled nylon R1.27 22.73 0.05 0.895 MAX CONNECTIONS 10.67 0.42 PANEL THICKNESS Pin 1 - 5V power (RED) Pin 2 - Ground (BLACK) Pin 3 - Signal (BLUE) 3.1750.508 0.1250.020 Pin 1 1 OPTIONAL MATING HARNESS WIRING SPECIFICATION Part number: 505-507 Red: Power (5 V) Wire type: 22 AWG 25 cm PTFE Black: Ground Connector: Molex 0050579503 Blue: Signal 3.1750.508 1 - The CW Series is fitted with a three terminal SAMTEC (TLW-103-05-T-S) 0.1250.020 2.54 mm header. An optional 22 AWG Mating Harness (PN 505-507) may be specified from theTermina category of the Option Selection Guide. 2 JOYSTICKS