DMR01 Apem

FEATURES High reliability. NDI & DM SERIES Self-cleaning contacts. Multi- positions. SPST STANDARD DIP SWITCHES Process compatible with tape seal. Dual in-line .100 x .300 term. spacing. GENERAL SPECIFICATIONS ELECTRICALS Electrical life 2000 cycles min. per switch 24 VDC, 25 mA Contact rating, non-switching 100 mA at 50 VDC Contact rating, switching 25 mA at 24 VDC Contact resistance at current 100 mA 50 milliohms max. initial - 100 milliohms max. after life test Insulation resistance at 500 VDC 100 Megohms minimum Dielectric strength 500 VAC for 1 minute Capacitance 5 pf. max. between adjacent terminals MECHANICALS, THERMALS Mechanical life 2000 cycles min. per switch Operating force 1000 grams max. Vibration 10-55 Hz.per MIL-STD-202F METHOD 201A Shock 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B Operating temperature range -20C to 85C SOLDERING & CLEANING RECOMMENDATIONS* Hand soldering 350C max. for 2 seconds max.(30 watt iron max.) Wave soldering 260C max. for 5 seconds max. Cleaning (with tape seal) Spray wash from top side only. * Note: keep switches in OFF position during soldering and cleaning for best results MATERIALS P Base & Cover NDI: UL94V-O, glass fiber filled PBT, black DM: UL94V-O, glass fiber filled PPS, black Actuators UL94V-O, Nylon, white Contacts Gold over nickel plated copper alloy Terminals Gold plated brass. Term. Sealing Molded-in Tape seal Kapton PACKAGING DIP switches are shipped in standard IC tubes with all actuators in theOF position. Tape & reel packaging per EIA available for DMR models (see next page). SWITCH SCHEMATIC (TYPICAL) CROSS SECTIONS Double contact system See tabulations on following pages for DI & DM number of positions available (10 shown) APEMP2 , 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. NDI Series Squared terminals Spread terminals Machine MODEL MODEL MODEL MODEL Insertable ++ + ++ NO. NO. NO. NO. No. A Dim. with no with with no with of +.008/-.000 tape seal tape seal tape seal tape seal Pos. (+0.2/-0.0mm) NDI01H n/a NDI01S n/a 1 .137 (3,48) NDI02H n/a NDI02S n/a 2 .237 (6,02) NDI04H n/a NDI04S n/a 4 .437 (11.10) NDI06H n/a NDI06S n/a 6 .637 (16,18) NDI08H n/a NDI08S n/a 8 .837 (21,26) NDI10H n/a NDI10S n/a 10 1.037 (26,34) NDIR01H n/a NDIR01S n/a 1 .137 (3,48) NDIR02H NDIR02HT NDIR02S NDIR02ST 2 .237 (6,02) NDIR04H NDIR04HT NDIR04S NDIR04ST 4 .437 (11,10) NDIR06H NDIR06HT NDIR06S NDIR06ST 6 .637 (16,18) NDIR08H NDIR08HT NDIR08S NDIR08ST 8 .837 (21,26) NDIR10H NDIR10HT NDIR10S NDIR10ST 10 1.037 (26,34) + Auto-insertable using equipment from Amistar, Dynapert, Panasert, Northeastern Tool, Universal and others. n/a = not available. MODEL MODEL NO. NO. A Dimension P Actuator with no with No. of +.008/-.000 DM Series Style tape seal tape seal Pos. (+0.2/-0.0mm) Surface Raised DM01 n/a 1 .137 (3,48) Mount ++ + ++ Actuator DM02 n/a 2 .237 (6,02) DM03 n/a 3 .337 (8,56) DM04 n/a 4 .437 (11,10) DM05 n/a 5 .537 (13,64) DM06 n/a 6 .637 (16,18) DM07 n/a 7 .737 (18,72) DM08 n/a 8 .837 (21,26) DM09 n/a 9 .937 (23,80) DM10 n/a 10 1.037 (26,34) DM12 n/a 12 1.237 (31.42) Recessed DMR01 n/a 1 .137 (3,48) Actuator DMR02 DMR02T 2 .237 (6,02) DMR03 DMR03T 3 .337 (8,56) DMR04 DMR04T 4 .437 (11,10) DMR05 DMR05T 5 .537 (13,64) DMR06 DMR06T 6 .637 (16,18) DMR07 DMR07T 7 .737 (18,72) DMR08 DMR08T 8 .837 (21,26) DMR09 DMR09T 9 .937 (23,80) DMR10 DMR10T 10 1.037 (26,34) DMR12 DMR12T 12 1.237 (31.42) For tape & reel packaging on DMR models only, add TR to model number - example: DMR08TTR. Note- tape & reel packaging is available only with tape seal models. 900 switches per reel. APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info apem.comP3 Recessed Raised Actuator SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.