DS-DP-DA series DIP switches Distinctive features and specifications Standard, piano and right angle models 2 to 12 positions Top tape sealing option ELECTRICAL SPECIFICATIONS MATERIALS Current/voltage rating : Case, UL94-V0, glass fiber - non-switching : 100mA 50VDC filled PBT, black - switching : 50mA 24VDC Cover : UL94-V0,glass fiber Contact resistance (at 100mA) : filled PBT, red 50m max. at initial Actuator : UL94-V0, glass 100m after life test fiber filled PBT, white Insulation resistance (at 100VDC +/-15V) : Terminals/contacts : gold over 100 M min. between adjacent terminals nickel plated phosphor bronze Dielectric strength : 500VDC for one minute Terminal seal : epoxy Capacitance : 5 pF between adjacent terminals Tape seal : polyester film Circuit : single pole, single throw Electrical life : 2.000 cycles min. per switch GENERAL SPECIFICATIONS Operating force : DP models : 4N DS/DA models : 8N Travel : 2 mm (.078) Mechanical life : 5.000 cycles min. per switch Vibration test : MIL-STD-202F method 201A Shock test : MIL-STD-202F method 213B, conditon A Operating temperature : -20C to +70C RECOMMENDED SOLDERING AND CLEANING PROCESSES Hand soldering : 320C max. for 2 seconds max. (30 watt iron max.) F Wave soldering : 260C max. for 5 seconds max. Force rinse, high agitation or triple bath cleaning method (with tape seal, option T) : freon TF or TE. When vapor methods are used, do not subject switch to solvents above 51C. Note : keep switches inOF position during soldering and cleaning for best results. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : standard IC tubes - Quantities depending on model. See table below. DS/DSR Quantity DS-T/DSR-T Quantity DA Quantity DA-T Quantity DP/DPL Quantity DP-T/DPL-T Quantity DS(R)-02 72 DS(R)-02T 70 DA-02 73 DA-02T 70 DP(L)-02 70 DP(L)-02T 65 DS(R)-03 51 DS(R)-03T 50 DA-03 52 DA-03T 50 DP(L)-03 50 DP(L)-03T 48 DS(R)-04 40 DS(R)-04T 40 DA-04 40 DA-04T 39 DP(L)-04 39 DP(L)-04T 39 DS(R)-05 32 DS(R)-05T 32 DA-05 33 DA-05T 32 DP(L)-05 32 DP(L)-05T 32 DS(R)-06 27 DS(R)-06T 28 DA-06 28 DA-06T 28 DP(L)-06 27 DP(L)-06T 25 DS(R)-07 24 DS(R)-07T 24 DA-07 24 DA-07T 24 DP(L)-08 21 DP(L)-08T 21 DS(R)-08 21 DS(R)-08T 21 DA-08 21 DA-08T 21 DP(L)-10 17 DP(L)-10T 17 DS(R)-09 19 DS(R)-09T 19 DA-09 19 DA-09T 19 DP(L)-12 14 DP(L)-12T 14 DS(R)-10 17 DS(R)-10T 17 DA-10 17 DA-10T 17 DS(R)-12 14 DS(R)-12T 14 DA-12 14 DA-12T 14 F-8 www.apem.com APEM DS/DSR series Standard DIP switches Raised or recessed actuator 2 to 12 positions 1 2 3 4 5 6 7 8 9 10 11 12 MODEL STRUCTURE Raised actuator : DS No. 1.40 1.60 Model No Dim (max.) Dim. (.055) (.062) pos. DS-02 2 6,60 (.259) 2,54 (.100) DS-03 3 9,14 (.359) 5,08 (.200) 2.54 0.60 7.62 DS-04 4 11,68 (.459) 7,62 (.300) (.100) (.023) (.300) A DS-05 5 14,22 (.559) 10,16 (.400) ON DS-06 6 16,76 (.659) 12,70 (.500) DS-07 7 19,30 (.759) 15,24 (.600) 1 2 3 4 5 6 7 8 DS-08 8 21,84 (.859) 17,78 (.700) 2.54 0.97 (.100) (.038 DIA) DS-09 9 24,38 (.959) 20,32 (.800) DS-10 10 26,92 (1.059) 22,86 (.900) DS-12 12 32,00 (1.259) 27,94 (1.100) B F Top tape sealed : add after model number. Recessed actuator : DSR No. Model No Dim Dim. pos. DSR-02 2 6,60 (.259) 2,54 (.100) DSR-03 3 9,14 (.359) 5,08 (.200) 2.54 0.60 7.62 DSR-04 4 11,68 (.459) 7,62 (.300) (.100) (.023) (.300) DSR-05 5 14,22 (.559) 10,16 (.400) A DSR-06 6 16,76 (.659) 12,70 (.500) ON DSR-07 7 19,30 (.759) 15,24 (.600) 1 2 3 4 5 6 7 8 DSR-08 8 21,84 (.859) 17,78 (.700) 2.54 0.97 (.100) (.038 DIA) DSR-09 9 24,38 (.959) 20,32 (.800) DSR-10 10 26,92 (1.059) 22,86 (.900) DSR-12 12 32,00 (1.259) 27,94 (1.100) B Top tape sealed : add after model number. APEM www.apem.com F-9 10.16 Maxi 6.90 3.30 mini (.400 MAX) (.129 min) (.271) 10.16 Maxi 5.65 3.30 mini (.400 MAX) (.129 min) (.222) 7.62 3.60 (.300) (.141) 7.62 3.60 (.300) (.141) 1.25 (.049)