03-Series DS DA DP-A 03-Series DS DA DP-A 21/11/12 18:48 Page7 DS-DP-DA series DIP switches Distinctive features and specifications Standard, piano and right angle models 2 to 12 positions Top tape sealing option ELECTRICAL SPECIFICATIONS MATERIALS Current/voltage rating : Case, UL94-V0, glass fiber - non-switching : 100mA 50VDC filled PBT, black - switching : 50mA 24VDC Cover : UL94-V0,glass fiber Contact resistance (at 100mA) : filled PBT, red 50m max. at initial Actuator : UL94-V0, glass 100m after life test fiber filled PBT, white Insulation resistance (at 100VDC +/-15V) : Terminals/contacts : gold over 100 M min. between adjacent terminals nickel plated phosphor bronze Dielectric strength : 500VDC for one minute Terminal seal : epoxy Capacitance : 5 pF between adjacent terminals Tape seal : polyester film Circuit : single pole, single throw Electrical life : 2.000 cycles min. per switch GENERAL SPECIFICATIONS Operating force : DP models : 4N - DS/DA models : 8N Travel : 2 mm (.078) Mechanical life : 5.000 cycles min. per switch Vibration test : MIL-STD-202F method 201A Shock test : MIL-STD-202F method 213B, conditon A Operating temperature : -20C to +70C RECOMMENDED SOLDERING AND CLEANING PROCESSES Hand soldering : 320C max. for 2 seconds max. (30 watt iron max.) F Wave soldering : 260C max. for 5 seconds max. Force rinse, high agitation or triple bath cleaning method (with tape seal, option T) : freon TF or TE. When vapor methods are used, do not subject switch to solvents above 51C. Note : keep switches inOF position during soldering and cleaning for best results. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Packaging unit : standard IC tubes - Quantities depending on model. See table below. DS/DSR Quantity DS-T/DSR-T Quantity DA Quantity DA-T Quantity DP/DPL Quantity DP-T/DPL-T Quantity DS(R)-02 72 DS(R)-02T 72 DA-02 73 DA-02T 70 DP(L)-02 70 DP(L)-02T 65 DS(R)-03 51 DS(R)-03T 51 DA-03 52 DA-03T 50 DP(L)-03 50 DP(L)-03T 49 DS(R)-04 40 DS(R)-04T 40 DA-04 40 DA-04T 39 DP(L)-04 39 DP(L)-04T 39 DS(R)-05 32 DS(R)-05T 32 DA-05 33 DA-05T 32 DP(L)-05 32 DP(L)-05T 32 DS(R)-06 27 DS(R)-06T 27 DA-06 28 DA-06T 28 DP(L)-06 27 DP(L)-06T 27 DS(R)-07 24 DS(R)-07T 24 DA-07 24 DA-07T 24 DP(L)-08 21 DP(L)-08T 21 DS(R)-08 21 DS(R)-08T 21 DA-08 21 DA-08T 21 DP(L)-10 17 DP(L)-10T 17 DS(R)-09 19 DS(R)-09T 19 DA-09 19 DA-09T 19 DP(L)-12 14 DP(L)-12T 14 DS(R)-10 17 DS(R)-10T 17 DA-10 17 DA-10T 17 DS(R)-12 14 DS(R)-12T 14 DA-12 14 DA-12T 14 APEM www.apem.com F-703-Series DS DA DP-A 03-Series DS DA DP-A 21/11/12 18:48 Page8 DS/DSR series Standard DIP switches Raised or recessed actuator 2 to 12 positions 3 5 6 1 2 4 7 8 9 10 11 12 MODEL STRUCTURE Raised actuator : DS No. 1.40 1.60 Model No Dim Dim. (.055) (.062) pos. DS-02 2 6,60 (.259) 2,54 (.100) DS-03 3 9,14 (.359) 5,08 (.200) 2.54 0.60 7.62 DS-04 4 11,68 (.459) 7,62 (.300) (.100) (.023) (.300) DS-05 A 5 14,22 (.559) 10,16 (.400) DS-06 ON 6 16,76 (.659) 12,70 (.500) DS-07 7 19,30 (.759) 15,24 (.600) 1 2 3 4 5 6 7 8 DS-08 8 21,84 (.859) 17,78 (.700) 2.54 0.97 (.100) (.038 DIA) DS-09 9 24,38 (.959) 20,32 (.800) DS-10 10 26,92 (1.059) 22,86 (.900) DS-12 12 32,00 (1.259) 27,94 (1.100) B F Top tape sealed : add after model number. Recessed actuator : DSR No. Model No Dim Dim. pos. DSR-02 2 6,60 (.259) 2,54 (.100) DSR-03 3 9,14 (.359) 5,08 (.200) 2.54 0.60 7.62 DSR-04 4 11,68 (.459) 7,62 (.300) (.100) (.023) (.300) DSR-05 5 14,22 (.559) 10,16 (.400) A DSR-06 6 16,76 (.659) 12,70 (.500) ON DSR-07 7 19,30 (.759) 15,24 (.600) 1 2 3 4 5 6 7 8 DSR-08 8 21,84 (.859) 17,78 (.700) 2.54 0.97 (.100) (.038 DIA) DSR-09 9 24,38 (.959) 20,32 (.800) DSR-10 10 26,92 (1.059) 22,86 (.900) DSR-12 12 32,00 (1.259) 27,94 (1.100) B Top tape sealed : add after model number. F-8 www.apem.com APEM 10.16 Maxi 3.30 mini 6.90 (.400 MAX) (.271) (.129 min) 10.16 Maxi 3.30 mini 5.65 (.400 MAX) (.129 min) (.222) 7.62 3.60 (.300) (.141) 7.62 3.60 (.300) (.141) 1.25 (.049)