03-Series NDS_DA_DP-A-maj 03-2014_03-Series DS_DA_DP-A 06/11/14 14:05 Page7
NDS-DP-DA series
DIP switches
Distinctive features and specifications
UG1410A
Standard, piano and right angle models
1 to 12 positions
Top tape sealing option
ELECTRICAL SPECIFICATIONS MATERIALS
Current/voltage rating : 25mA 24VDC Case, UL94-V0, glass fiber
Initial contact resistance : 50m max. filled PBT, black
Insulation resistance (at 500VDC) : Cover : UL94-V0,glass fiber
100 M min. between adjacent terminals filled PBT, red
Dielectric strength : 500VDC for one minute Actuator : UL94-V0, glass
Circuit : single pole, single throw fiber filled PBT, white
Electrical life : 2.000 cycles min. per switch Terminals/contacts : gold over
nickel plated phosphor bronze
Terminal seal : epoxy
GENERAL SPECIFICATIONS Tape seal : polyester film
Operating force :
- NDS/DA models : 10N
- DP models : 4N
Travel :
- NDS/DA : 2 mm (.078)
- DP models : 30
Operating temperature :
- DP/DA models : -20C to +70C
- NDS models : -40C to +85C
RECOMMENDED SOLDERING AND CLEANING PROCESSES
Hand soldering : 320C max. for 2 seconds max. (30 watt iron max.)
Wave soldering : 260C max. for 5 seconds max.
F
Force rinse, high agitation or triple bath cleaning method (with tape seal, option T) : freon TF or TE. When vapor
methods are used, do not subject switch to solvents above 51C.
Note : keep switches inOF position during soldering and cleaning for best results.
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Packaging unit : standard IC tubes - Quantities depending on model. See table below.
NDS(R) Quantity NDS(R)-T Quantity DA Quantity DA-T Quantity DP/DPL Quantity DP-T/DPL-T Quantity
NDS(R)-01 120 NDS(R)-01T 113 DA-02 73 DA-02T 70 DP(L)-02 70 DP(L)-02T 65
NDS(R)-02 72 NDS(R)-02T 70 DA-03 52 DA-03T 50 DP(L)-03 50 DP(L)-03T 49
NDS(R)-03 51 NDS(R)-03T 50 DA-04 40 DA-04T 39 DP(L)-04 39 DP(L)-04T 39
NDS(R)-04 40 NDS(R)-04T 39 DA-05 33 DA-05T 32 DP(L)-05 32 DP(L)-05T 32
NDS(R)-05 32 NDS(R)-05T 32 DA-06 28 DA-06T 28 DP(L)-06 27 DP(L)-06T 27
NDS(R)-06 27 NDS(R)-06T 27 DA-07 24 DA-07T 24 DP(L)-08 21 DP(L)-08T 21
NDS(R)-07 24 NDS(R)-07T 24 DA-08 21 DA-08T 21 DP(L)-10 17 DP(L)-10T 17
NDS(R)-08 21 NDS(R)-08T 21 DA-09 19 DA-09T 19 DP(L)-12 14 DP(L)-12T 14
NDS(R)-09 19 NDS(R)-09T 19 DA-10 17 DA-10T 17
NDS(R)-10 17 NDS(R)-10T 17 DA-12 14 DA-12T 14
NDS(R)-12 14 NDS(R)-12T 14
The company reserves the right to change specifications without notice.
APEM www.apem.com F-703-Series NDS_DA_DP-A-maj 03-2014_03-Series DS_DA_DP-A 06/11/14 14:05 Page8
NDS/NDSR series
Standard DIP switches
Raised or recessed actuator
1 to 12 positions
3 5 6
1 2 4 7 8 9 10 11 12
MODEL
STRUCTURE
Raised actuator : NDS
1.40 1.60
(.055) (.062)
No.
Model No Dim. Dim.
pos.
NDS-01 1 4,22 (.166) -
NDS-02
2 6,44 (.253) 2,54 (.100)
2.54 0.60 7.62
(.100) (.023) (.300)
NDS-03 3 8,98 (.353) 5,08 (.200)
A
NDS-04 4 11,52 (.453) 7,62 (.300)
ON DIP
NDS-05 5 14,06 (.553) 10,16 (.400)
NDS-06 6 16,60 (.653) 12,70 (.500)
1 2 3465 78
NDS-07 7 19,14 (.753) 15,24 (.600)
2.54 0.97
NDS-08 (.100) (.038 DIA)
8 21,68 (.853) 17,78 (.700)
NDS-09 9 24,22 (.953) 20,32 (.800)
NDS-10 10 26,76 (1.053) 22,86 (.900)
B
NDS-12 12 31,84 (1.253) 27,94 (1.100)
F
Top tape sealed : add after model number.
Recessed actuator : NDSR
NDSR-01
1 4,22 (.166) -
NDSR-02 2 6,44 (.253) 2,54 (.100)
2.54 0.60 7.62
(.100) (.023) (.300)
NDSR-03 3 8,98 (.353) 5,08 (.200)
NDSR-04 4 11,52 (.453) 7,62 (.300) A
NDSR-05 5 14,06 (.553) 10,16 (.400)
ON DIP
NDSR-06
6 16,60 (.653) 12,70 (.500)
1 2 3465 78
NDSR-07 7 19,14 (.753) 15,24 (.600)
2.54 0.97
NDSR-08 8 21,68 (.853) 17,78 (.700)
(.100) (.038 DIA)
NDSR-09 9 24,22 (.953) 20,32 (.800)
NDSR-10 10 26,76 (1.053) 22,86 (.900)
NDSR-12 12 31,84 (1.253) 27,94 (1.100)
B
Top tape sealed : add after model number.
F-8 www.apem.com APEM
No
Model No
Dim. Dim.
pos.
9.90
3.20 5.85
9.90 3.20 7.05
(.389) (.125) (.230)
(.389) (.125) (.277)
7.62 3.50
7.62 3.50
(.300) (.137)
(.300) (.137)
1.20
(.047)