ES2P41653001 Apem

ES series Heavy-duty emergency stop Distinctive features and specifications Rugged version : 100.000 cycle mechanical life Locked/unlocked status indicator Lower behind-panel depth IP65 sealing Complies with EN 60947-5-1 ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS Electrical function : push-pull ON-ON Panel thickness : 6 mm (.236) max. Current/voltage rating : 1A 24VDC DC-14 Mechanical life : 100.000 cycles Electrical life : 6.050 cycles Travel to lock : 2,20 mm 0,3 mm Contact resistance : 10 m max. Total travel : 4,20 mm 0,3 mm Insulation resistance : 1.000 M min. at 500VDC Torque : 5 Nm min. - 14 Nm max. Dielectric stength : 1.000 Vrms 50 Hz min. between terminals applied to nut 2.000 Vrms 50 Hz min. between poles and between terminals and frame Operating force : Push : 30N 7N - pull : 25N 5N ENVIRONMENTAL SPECIFICATIONS MATERIALS Sealing : IP65 Case : diallylphthalate (DAP) Salt spray : 96 hours according to IEC 68-2-11 Actuator : aluminium, red anodised Vibrations : 10-500 Hz - 10 g according to IEC 68-2-6 Bushing : aluminium, yellow Shock resistance : 50 g according to IEC 68-2-27 anodised Robustness (axial) : IK10 Contacts : silver, gold plated Operating temperature : -40C to +85C Terminal seal : epoxy According to EN 60947-5-1 PANEL CUT-OUT O-ring Note : the hole in the bushing is designed for insertion of a 2 mm metal rod helping to fasten the switch on the panel. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Tolerance : The general tolerance for dimensions in this brochure is 0,3 (.012). Dimensions, specifications and data shown in this brochure are subject to change without notice. APEM www.apem.com 1ES series Heavy-duty emergency stop Overview ES SERIES Electrical functions No of poles Actuator colour Status indicator colour 1 2 NC (double pole only) 4 Double pole 6 Red anodised 3 Green 2 1 NO + 1NC (double Other : on request pole only) Other : on request. Terminals Actuator diameter Bushing colour Options P Straight PC 1 35 mm (1.338) 5 Yellow Blank None S Solder lug anodised 001 PUSH PULL marking Other markings : on request NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 hex nut 25 (.984) across flats and 1 O-ring Packaging unit : 10 pieces 2 www.apem.com APEM