FG series FIXED GRIP hand controllers Distinctive features and specifications USB outputs available Rugged hand operation Above panel sealing up to IP65 Custom configured ENVIRONMENTAL STANDARD SWITCH CHARACTERISTICS/RATINGS Electrical Resistive Load : 5A Operating Temperature : -40C to 85C (-40F to 185F) (depending on the chosen switch) Storage Temperature: -40C to 85C (-40F to 185F) Electrical Inductive Load : 3A Sealing: up to IP65 (depending on the chosen switch) EMC Immunity Level (V/M): IEC 61000-4-8:2009 Low Level: 10mA 30mV EMC Emissions Level: IEC 61000-4-3:2006 (depending on the chosen switch) ESD: IEC 61000-4-2:2008 Electrical Life: 1 million cycles 5A 28 VDC NOTE: All values are nominal resistive snap-action (depending on the chosen switch) Mechanical Life: 1,000,000 cycles Action : Momentary, snap-action Operating Force : 7.5N2.0N (1.69lbf0.11lb) Total Travel: 0.080 inch max Over Travel: 0.010 inch min FG SERIES Termination Sealing Index Trigger Deadman Lever A 22AWG 10in PTFE A None N None 1 None B 28AWG 10in PTFE B Sealing * M Momentary 3 Mechanical paddle X Customer specied P Proportional D DP/DT Handle Index Trigger Guard Mounting Hardware Electrical Output or Interface 1 Oval 1 None 1 None 1 Voltage output 2 Red 2 Plate and screws 2 USB, Game Controller 3 Black 5 USB, Cursor Emulation NOTES: 1 0.5V to 4.5V output 2 Double pole/double throw Above panel sealing up to IP65 available (dependent on handle conguration). Mounting accessories. Screws: 1/4-20 x 1.25in stainless steel screws, lock washers, and hex nuts. Note: The company reserves the right to change specifications without notice. APEM www.apem.comFG series FIXED GRIP hand controllers Overview HANDLE / INDEX TRIGGER INDEX TRIGGER WITH TRIGGER GUARD INDEX TRIGGER NO INDEX TRIGGER 99.10 3.90 14.08 .55 167.64 20.32 6.60 .80 49.16 1.94 1/4-20 X 0.75 SHCS 4 PLACES 14.87 .59 20.96 .83 NOTES 1. Dimensions are in mm/(inch). 2. FACEPLATE: The FG series FIXED GRIP hand controller features a modular faceplate that can be customized for specic applications. Ambidextrous for most congurations, the faceplate may be populated with a variety of thumb actuated switches including momentary pushbuttons, latching pushbuttons, two or three way toggle switches, 4 or 5 way trims, and miniature proportional joysticks. Every FG faceplate is custom congured to order. Please consult factory for options. 3. INDEX TRIGGER The FG series FIXED GRIP controllers may be equipped with or without an index trigger switch. Index trigger conguration options include a single pole normally open momentary switch, a double pole double throw tactile switch, or a proportional Hall eect device. Index Trigger Options: N: None M: Momentary, single pole normally open P: Hall eect, 0.5V to 4.5V proportional output D: Double pole, double throw 4. DEADMAN LEVER Deadman Lever Options: 1: None 2. Mechanical Paddle Note: The company reserves the right to change specifications without notice. www.apem.com APEM