HS1A24GA Apem

HS series Sealed 5-way switch based miniature joystick Distinctive features and specifications 5-way with center pushbutton option Positive tactile feedback MOM-OFF-MOM action Threaded bush mount option Sealed to IP68 and IP69K Connectorized housing CURRENT/VOLTAGE RATING WITH RESISTIVE LOAD CONTACT RATING LIFECYCLES Gold plated (G) 10mA 30VDC 200,000 operations Silver plated (S) 100mA 30VDC 100,000 operations Mechanical life 300,000 operations Insulation resistance Min 100M (250VDC by insulation resistance meter) Voltage withstand 500VAC for 1 minute Contact resistance Max 200m (by YHP4328A) Electrical function MOM-OFF-MOM TERMINATION MECHANICAL 1 Manufacturer: Molex Operating Force: 5.56N0.53N (1.25lbf0.12lbf) 1 Manufacturer part number: 501331-0607 Maximum Vertical Load: 200N (45lbf) 1 Product range: Pico-Clasp Maximum Horizontal Load: 150N (33.7lbf) Circuits: Six Lever travel: 30 (15 ) Pitch: 1.00mm Mass/weight: 17g (0.0375lb) (Option HS1DXXXA) Mating connector: Molex 501330-0600 ENVIRONMENTAL 3 OPTIONAL MATING HARNESS Sealing: IP68, IP69K Wire type : 28AWG 25cm PTFE Operating temperature: -25 C to +80 C (-13F to +176F) Connector: Molex 501330-0600 PUSHBUTTON SWITCH (Option 6 Handle) Electrical life: 100,000 cycles Rating: 50 mA,12VDC Terminal: Brass with silver plating Contact resistance: 100 milliohms max. Insulation resistance: 100 megohms min. 500VDC Dielectric strength: 250VAC /1 minute Contact arrangement: 1 pole 1 throw Operation force: 1.5lbf Stop strength: Max 3kgf vertical static load for 15 seconds Operating temperature: -25 C to +70 C (-13F to +158F) Storage temperature: -30 C to +85 C (-22F to +185F) NOTES: 1. Force applied to the top of the castle cap. 2. All options are IP68 and IP69K rated, however Drop-in mounting does not prevent panel ingress. 3. The HS Series tactile toggle switch is fitted with a six terminal Molex (501331-0607) connector. A mating harness is not included, but may be specified at the time of order for an additional charge. The 4-function harness is part number 505-508. The 5-function harness, necessary for the Option 6 Handle is part number 505-509. - All values are nominal. Note: The company reserves the right to change specifications without notice. APEM www.apem.comHS series Sealed 5-way switch based miniature joystick Overview HS A SERIES Handle Mounting Style Termination Limiter Contact 0 None N None 1 1.00mm (0.039in) 2 2-way S Silver Plated 1 Castle D Drop-in Pitch Molex Connector 4 4-way G Gold Plated 2 Winged Hat R Rear Mount 2 1.00mm (0.039in) 3 Conical A Drop-in and Rear Mount Pitch Molex Connector 4 Finger Tip T Threaded Housing with 10 Mating Harness 5 Round Jog 6 Pushbutton 7 Mushroom* 8 Low Profile* * = Not available with Threaded Housing (Mounting Style Option T) Y+ WIRING X- X+ CONNECTOR POSITION FUNCTION WIRE HARNESS 1 Top Switch* Orange Y- 2 X+ Switch Blue 3 Y+ Switch Yellow 23.20 4 X- Switch Blue / White (0.91) 39.20 5 Y- Switch Yellow / Black (1.55) 6 Common White 14.80 16.00 * = Optional (0.58)(0.63) Pin 1 25.40 (1.00) HANDLE OPTIONS 1. CASTLE 2. WINGED HAT 3. CONICAL 4. FINGER TIP 17.42 .686 (0.686) 17.30 .681 17.17 18.36 (0.681) .676 .723 (0.676) (0.723) 29.69 1.169 (1.169) 19.84 20.35 18.67 .801 .735 (0.781) (0.801) (0.735) 5. ROUND JOG 6. PUSHBUTTON 7. MUSHROOM 8. LOW PROFILE 17.22 .678 17.65 (0.678) .695 20.32 (0.695) .800 15.24 (0.800) .600 (0.600) 24.08 .948 19.99 20.27 (0.948) .787 .798 14.88 (0.798) (0.787) .586 (0.586) NOTE: Dimensions are in mm/(inch) Note: The company reserves the right to change specifications without notice. www.apem.com APEM