JD9H126W Apem

2.03 0.080 JD9 SERIES KEY SWITCH 19.2 mm PANEL CUTOUT KEYSWITCH ELECTRICAL SPECIFICATION: CONTACT RATING: 4A 125VAC/28VDC, 2A 250VAC CONTACT RESISTANCE: BELOW 10 MILLION OHMS 9 INSULATION RESISTANCE: 10 OHMS Min. DIELECTRIC STRENGTH: 1000V RMS Min. Sea level ELECTRICAL LIFE: 6,000 make-and-break cycles at Full load. PATENT NO. 36076 MATERIALS: LOCK HOUSING: ZINC ALLOY DIE-CASTED NICKEL PLATED CYLINDER: 4 DISC TUMBLER CONSTRUCTION, ZINC ALLOY DIE-CASTED NICKEL PLATED. KEYS: BRASS, NICKEL PLATED, SINGLE BITTED. CONTACTS: SUPER HARD COPPER ALLOY, GOLD PLATED. MOUNTING NUT: ZINC ALLOY DIE CASTED NICKEL PLATED. M19*P1.0 NUT OR CLIP 7 KEY CODE NO. 0.276 1 5.6 5.25 6.5 12.5 9.8 0.614 0.207 0.386 0.256 0.492 22 16 0.866 0.630 TERMINAL (BOTTOM VIEW) = Momentary position (45) =Momentary poistion (45X) LEGEND: 5.25 = Detent positions (45 or 90 ) =Detent poistions (4X5X or 90X) 0.207 =Key pull possible in these poistions. = Key pull possible in these positions or or Stop positions. APEM COMPONENTS LTD Drakes Drive, Long Crendon, Bucks HP18 9BA Tel: +44 (0) 1844 202400 Fax: +44 (0) 1844 202500 Web site: http//www.apem.co.uk e-mail: sales apem.co.uk 22.3FX 12.5 0.492 0.51 0.020 90FX JD9 SERIES KEY SWITCH 19.2 mm PANEL CUTOUT LOCK MODEL NO. KEY PULL CONNEDCTED TERMINALS CONFIGURAION POSSIBLE POS.1 POS.2 POS.3 POS.4 POS.5 (AS VIEWED FROM KEY END) NO. POLES THESE POS. POS.1 2 45 3 INDEXING 8-1 4-5 1-2 5-6 7-8 3-4 POS.1 JD9H126W POS.1 2 45 POS.1 3 INDEXING JD9J126W 8-1 4-5 1-2 5-6 7-8 3-4 POS.2 POS.3 POS.1 90 INDEXING JD9O126W 8-1 4-5 1-3 5-7 POS.1 2 POS.1 90 POS.1 INDEXING JD9S126W 8-1 4-5 1-3 5-7 POS.2 2 ATTACHED WIRE SPEC TERMINAL LENGTH(mm) SPEC UL1007 1 250 20AWG BLACK 2 250 UL1007 20AWG BLUE UL1007 3 250 20AWG BROWN 4 250 UL1007 20AWG GREEN UL1007 5 250 20AWG GREY 6 250 UL1007 20AWG RED UL1007 7 250 20AWG VIOLET 8 250 UL1007 20AWG YELLOW APEM COMPONENTS LTD Drakes Drive, Long Crendon, Bucks HP18 9BA Tel: +44 (0) 1844 202400 Fax: +44 (0) 1844 202500 Web site: http//www.apem.co.uk e-mail: sales apem.co.uk