M series Miniature resistive joysticks Distinctive features and specifications Worlds 1 selling joystick for CCTV applications Potentiometric sensing One, two or three axis Low profile design with 17 handle options RoHS MECHANICAL (FOR X AND Y AXIS) MECHANICAL (FOR Z AXIS) Break Out Force: 0.7N (0.16lbf) Break Out Torque: 0.022Nm (0.19lbfin) Operating Force: 1.3N (0.29lbf) Operating Torque: 0.040Nm (0.35lbfin) Maximum Applied Force: 100N (22.48lbf) Maximum Allowable Torque: 0.049Nm (0.43lbfin) Mechanical Angle of Movement: 56 Mechanical Angle: 90 Expected Life: See potentiometer options Handle Action: Spring Mass/weight: Varies Package Size (mm) (L x W x H) or (Dia x H): Varies ENVIRONMENTAL Lever Action (Centering): Spring or Friction Operating Temperature: -25C to 70C (-13F to 158F) Storage Temperature: -40C to 70C (-40F to 158F) POTENTIOMETER OPTIONS Potentiometer P M R Electrical Element Conductive Plastic Conductive Plastic Conductive Plastic Track Resistance 5K 5K 5K Linearity 1.0% 5.0% 1.0% Track Operating Angle 220 56 50 CRV 1.5% 1.5% 1.0% Power Dissipation 0.25W 40C 0.5W 70C 1W Rotational Life 1,000,000 1,000,000 10,000,000 CENTERING OPTIONS SPRING CENTERING: The joystick returns to center when the handle is released. TORQUE SET: Torque set provides absolute positioning with uniform friction applied to X and Y axis. NOTES: All values are nominal. Specifications are subject to the joystick configuration. Contact Technical Support for the performance of your specific configuration. The M Series is intended for internal applications. Note: The company reserves the right to change specifications without notice. APEM www.apem.comM series Miniature resistive joysticks Overview M 1 1 SERIES Mounting Bezel Handle C Split Bezel 0 Tapered Convex F Square Bezel 1 Concave Tip L Rubber Boot Kit 2 Flat Tipped 3 Concave Tip - Long 5 Pushbutton 6 Straight Tip - Short 8 3 Axis 9 3 Axis with Pushbutton A Straight Tip - Mid B Straight Tip - Long C Ball Tip Model Output Options Centering E Pushbutton G Pushbutton 1 2 Axis Potentiometers: 0 Spring Centering H Pushbutton 2 2 Axis with Pushbuttons 6 Torque Set (Friction) P 5K, 220 M 3 Axis No Button 3 3 Axis M 5K, 56 N 3 Axis with 1 Button 4 3 Axis with Pushbuttons R 5K, 50 Q 3 Axis with 2 Buttons INSTALLATION NOTES: 1. Front Mounting Bezels (FM) C = Split Bezel Cutout dimensions = 39.70mm(1.562in) L = Rubber Boot Cutout dimensions = 39.70mm(1.562in) 2. Rear mounting bezels (RM) F = Square Bezel Cutout dimensions = 30.15mm(1.187in) 3. Potentiometer specifications are located on the previous page. Mounting accessories. Standard hardware includes: C= Ring, cup, and 4 black Phl screws 2-56x1/2in L= Ring and 4 black Phl screws 2-56x1/2in F= Square bezel, 4 screws 2-56x1/2in Phl, and 4 screws 2-56x1/4in Phl Note: The company reserves the right to change specifications without notice. www.apem.com APEM