M series Proportional resistive fingertip controllers potentiometer technology DISTINCTIVE FEATURES One, two or three axis Analog output Low profile mounting depth Friction centering option Low profile design with multiple handle options ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -25 C to +70 C (-13 F to +158 F) Storage Temperature: -40 C to +70 C (-40 F to +158 F) MECHANICAL SPECIFICATIONS (X & Y AXIS) Operating Force: 1.3 N (0.29 lbf) Maximum Vertical Load: 100 N (22.5 lbf) Maximum Horizontal Load: 100 N (22.5 lbf) Mechanical Angle of Movement: 56 Expected Life: See potentiometer options Mass/weight: Varies Lever Action (centering): Spring or friction MECHANICAL SPECIFICATIONS (Z AXIS) Operating Torque: 0.040 Nm (0.35 lbf in) Break out Torque: 0.022 Nm (0.19 lbf in) Maximum Allowable Torque: 0.049 Nm (0.43 lbf in) Mechanical Angle of Movement: 90 Lever Action (centering): Spring MATERIALS Body: Nylon Actuator: Nylon The company reserves the right to change specifications without notice. 1 JST-M-2101 JOYSTICKSM series Proportional resistive fingertip controllers potentiometer technology MOUNTING WIRING DIAGRAM INSTALLATION DEFAULT WIRE COLOR CODE * COLOR FUNCTION AWG 2 OR 3 AXIS JOYSTICK WITH 1 PUSHBUTTON: OPTIONS 5, E, G, H, 9, N Orange Switch 1 28 Orange Switch Common 3 AXIS JOYSTICK WITH 2 PUSHBUTTONS: OPTION Q** Orange Switch 1 28 Brown Switch 2 Green Switch Common Z AXIS IN A 3 AXIS JOYSTICK: OPTION 8, 9, M, N, Q Red Supply 28 White Signal Blue Return * Wires for the Z axis and the pushbuttons are 292 mm (11.5in) and stripped ** Handle Q pushbuttons are shown in the following drawing 1 2 OUTPUTS FRONT MOUNTING BEZEL (FM) POTENTIOMETER OPTIONS C = Split Bezel Cutout dimensions = 39.70 mm (1.562 in) POTENTIOMETER P R Electrical Element CONDUCTIVE PLASTIc Track Resistance 5K Linearity 1.0% 1.0% L = Rubber Boot Track Operating Angle 220 50 Cutout dimensions = 39.70 mm (1.562 in) CRV 1.5% 1.0% Power Dissipation 0.25W 40 C 1 W Rotational Life 1,000,000 10,000,000 REAR MOUNTING BEZEL (RM) F = Square Bezel Cutout dimensions = 30.15 mm (1.187 in) MOUNTING ACCESSORIES Standard hardware includes: C=Ring, cup and 4 black Phl screws 2-56x 1/2 in L=Ring and 4 black Phl screws 2-56x 1/2 in F=Square bezel, 4 screws 2-56x1/2 in Phl and 4 screws 2-56x 1/2 in Phl 2 JOYSTICKS