MS series Mid-size Hall effect joysticks Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealing level up to IP67 (above panel) Available with USB Redundant outputs available 10 million life cycles Available with J1939 CAN bus and CANopen ELECTRICAL MECHANICAL (FOR X AND Y AXIS) Sensor: Hall effect Break Out Force: 5.6N (1.25lbf) Supply Voltage Operating: 5.00VDC Operating Force: 7.5N (1.70lbf) Reverse Polarity Max: -14.5VDC Maximum Applied Force: 650N (145lbf) Transient Overvoltage Max : 18VDC Mechanical Angle of Movement: 40 Output Impedance: 6 Expected Life: 10 million cycles Current Consumption Max: 10mA max per axis Material: Glass reinforced nylon Return to Center Voltage (No Load): 200mV Lever Action (Centering): Spring centering STANDARD SWITCH CHARACTERISTICS/RATINGS MECHANICAL (FOR Z AXIS) Electrical Resistive Load: Break Out Force: 0.15Nm (1.33lbfin) 5A (depending on the chosen switch) Operating Force: 0.25Nm (2.21lbfin) Electrical Inductive Load: Maximum Allowable Force: 4.50Nm (39.83lbfin) 3A (depending on the chosen switch) Hand Mechanical Angle: 68 Low Level: 10mA 30mV Handle Action: Spring return (depending on the chosen switch) Expected Life: 1 million cycles Electrical Life: 1 million cycles 5A 28 VDC resistive snap-action (depending on the chosen switch) ENVIRONMENTAL Mechanical Life: 1 million cycles Operating Temperature: -25C to 70C (-13F to 158F) Environmental Seal: IP68 Storage Temperature: -40C to 70C (-40F to 158F) Action: Momentary, snap-action Sealing (IP): Up to IP67* Operating Force: 7.5N2.0N (1.69lbf0.45lbf) EMC Immunity Level (V/M): IEC 61000-4-3:2006 Total Travel: 0.080 inches max EMC Emissions Level: IEC 61000-4-8:2009 Over Travel: 0.010 inches min ESD: IEC 61000-4-2:2008 * above panel NOTES: All values are nominal. Exact specifications may be subject to configuration. Contact Technical Support for the performance of your specific configuration. Note: The company reserves the right to change specifications without notice. APEM www.apem.comMS series Mid-size Hall effect joysticks Overview MS Front Buttons Side Buttons SERIES Spring Tension Output Options Additional Options N None 0 None 00 Standard 0 0V to 5V (Rail to Rail) V Voltage Regulator O One U One Upper Position 1 0.5V to 4.5V E Environmental Sealing * W Two L One Lower Position 2 0.25V to 4.75V F Two 3 1V to 4V D Operator Presence 4 0V to 5V Sensor 1 Paddle 0V to 5V Sensor 2 5 0.5V to 4.5V Sensor 1 Limiter Plate 0.5V to 4.5V Sensor 2 Handle Top Buttons 6 0.25V to 4.75V Sensor 1 S Square 10 Ball Tip 0 None 0.25V to 4.75V Sensor 2 R Round 42 Stock Grip 1 One 7 1V to 4V Sensor 1 X Slotted 31 Short Stock Grip 2 Two 1V to 4V Sensor 2 Y Slotted 23 Low Profile (2 Axis) R Rocker 8 0V to 5V Sensor 1 P Plus 24 Low Profile (3 Axis) 5V to 0V Sensor 2 D Diamond 54 Low Profile Square Front 9 0.5V to 4.5V Sensor 1 G Guided Feel Square (2 Axis) 4.5V to 0.5V Sensor 2 H Guided Feel Round 55 Low Profile Square Front 10 0.25V to 4.75V Sensor 1 (3 Axis) 4.75V to 0.25V Sensor 2 11 1V to 4V Sensor 1 NOTES: 4V to 1V Sensor 2 1. Low Profile handles are offered in two options: 0-U USB Low Profile Low Profile Square Front 1-J Cursor Emulation 2-C CAN bus J1939 3-C CANopen 2. CAN bus, USB or Voltage Regulator are mutually exclusive. *Environmental sealing level available up to IP67. Dependent upon handle configuration. Mounting accessories. Standard hardware includes: 4 screws (6-32x7/8) Phil. STOCK GRIP HANDLE SHORT STOCK GRIP LOW PROFILE HANDLE SQUARE FRONT Top and Side buttons Deadman Top buttons AVAILABLE BUTTON COLORS 4 White Gray Black Red Orange Yellow Green Blue Purple * Above panel, actual rating is dependent upon configuration NOTES: 1. The maximum possible configuration for the Stock Grip handle is up to 2 Top Buttons and 2 Side Buttons. A handle with an Operator Presence Paddle can have 2 Top Buttons, but no Side Buttons. 2. The maximum possible configuration for the Short Stock Grip handle is up to 2 Top Buttons. It is not possible with Operator Presence Paddle, Index Trigger, or Side Buttons. 3. The maximum possible configuration for the Low Profile Square Front handle is up to 2 Front Buttons. It is not possible with Operator Presence Paddle, Index Trigger, or Top Buttons. 4. If unspecified, the pushbuttons will have snap action momentary switches with red button caps. 5. Starting from the strain relief, the cable is 406mm (16in) long, 6.40mm (0.25in) stripped with plug, covered with an Note: The company reserves the right to change specifications without notice. expandable cable sleeve. www.apem.com APEM