MSG series Rugged switch guards for switch series 12000 - 3500 - 600H - 6000 DISTINCTIVE FEATURES Robust For harsh environments Modern, patented design GENERAL SPECIFICATIONS APEM SAS patented design Operating temperature : -40 C to +85 C (-40 F to +185 F) Storage temperature : -55 C to +85 C (-67 F to +185 F) Salt spray : IEC 60068-2-11, test KA, 96 hours Mechanical life : 20,000 cycles Switch guards are designed to prevent accidental lever operation on switches with 11.9 (.468) or 12 (.472) threaded bushing and lever length 17.5 (.688) outside bushing. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. Note : For correct switch operation, the switch guard should be adjusted properly (see Mounting below). MATERIALS Support plate : black stainless steel Cap : thermoset APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. PANEL CUT-OUT FOR BUSHING WITH KEYWAY FOR FLATTED BUSHING K F The company reserves the right to change specifications without notice. 1 CMSGCTKCMSGCTK CMSGCTFCMSGCTF Fichier: CMSGCFichier: CMSGCT T Echelle: Echelle: 1 1 le 04-02-2014le 04-02-2014 SW-MSG-1802 PANEL SWITCHESMSG series Rugged switch guards for switch series 12000 - 3500 - 600H - 6000 MOUNTING Standard With K sealing option With X408 sealing option BUILD YOUR PART NUMBER MSG SERIES NUMBER OF POSITIONS CUT-OUT TYPE MARKING For bushing 2 positions No marking 2 XX K with keyway Markings on request. 3 positions 3 For flatted F bushing SWITCH GUARD TYPE CUT-OUT ORIENTATION MARKING COLOR Locked in upper position North No marking 1 N X Locked in down position South Blue 2 S 1 COLORS Locked in center position Black 2 3 (3 positions only) Blue 1 Green 3 Locked in upper and down 4 positions Black 2 Grey 4 Locked in either position 5 Green 3 Yellow 5 Maximum lever width: Grey 4 Red 6 - 6 mm (.236) on 1,2,3,4 switch guard type - 9.5 mm (.374) on 5 switch guard type Yellow 5 White 7 . Red 6 Orange 9 White 7 Orange 9 ABOUT THIS SERIES On the following pages, you will find successively basic part numbers and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : supplied with the switch or to order separately (see Hardware section of website). 2 PANEL SWITCHES