PZ120RS Apem

PZ series Piezoelectric keypads DISTINCTIVE FEATURES Very long life Front or rear mounting 12 keys Panel sealed to IP68 Custom markings on request ENVIRONMENTAL SPECIFICATIONS Sealing : IP68 front and rear according to IEC 60529 Operating and storage temperature : -40 C to +85 C (-40 F to +185 F) Rapid temperature variation test according to IEC 68-2-14 test N Endurance test at extreme temperatures : 300.000 cycles Shock resistance according to NF EN 60068-2-27 : up to 90 G Abrasion test R3799 with Taber 5900 : 1.000.000 cycles min. Flame resistance : UL94 HB horizontal position (30 seconds max.) Salt spray : 96 hours according to IEC 68-2-11 test Ka Washability : most commonly used detergents and solvents ELECTRICAL SPECIFICATIONS Output type : 4 x 3 matrix (NO contacts) Contact bounce time : 1ms max. Insulation resistance (OFF = not actuated) : 5 M min. Initial contact resistance (ON = actuated) : 7.5 max. Switching Voltage max. : 24 VDC Switching Current max. : 200 mA Electrical life : 10 million cycles min. ESD test : 20 KV max. according to IEC 1000-4-2 The company reserves the right to change specifications without notice. 1 KBD-PZ-1803 SWITCH PANELSPZ series Piezoelectric keypads GENERAL SPECIFICATIONS Actuating contact force : 2 to 4 N (depending on temperature) Stroke : none Mechanical life : 10 million cycles min. Connection : 8-pin male connector MATERIALS Front panel : anodized aluminum Case : hard thermoplastic resin Sealing O-ring : neoprene Marking : chemically structured anodized silk screen with high abrasion resistance APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. EXTRA FEATURES AVAILABLE ON REQUEST Specific marking including colors Backlighted version (under development) 2 SWITCH PANELS