Q10 series 10 mm panel mount LED indicators DISTINCTIVE FEATURES 5 mm flush diffused LED, standard, hyper bright or water clear Flush chamfered bezel style (200 mm long) wire terminations ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: -40 C to +85 C ( -40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 60 (dependant on model) Life Expectancy: 100,000 hours Torque: 20 to 25 cNm (dependent on option) Maximum panel thickness 7 mm MATERIALS Stainless Steel 316L or Anodized Aluminium with potted rear end MOUNTING 10,00+0,15/-0,1 12,00 0,472 A/F 2,30 0,091 0.393+0.006/-0 The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and 1 IND-Q10-1710 LED INDICATORSQ10 series 10 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) LED COMPONENT SPECIFICATIONS 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max* Prominent and Flush Forward Voltage Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 80 mcd 8 mcd 2.0 V 12 VDC 10.8 to 13.2 VDC 20 mA Green 60 mcd 6 mcd 2.2 V 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 50 mcd 6 mcd 2.1 V 28 VDC 25.2 to 30.8 VDC 20 mA Blue 1,600 mcd 50 mcd 3.3V * Customer to supply resistor for desired operating White 1,600 mcd 500 mcd 3.3 V current. Orange 60 mcd 110 mcd 2.2 V Bi-color (Typical) 14/30 mcd 15/10 mcd 2.0 V/2.2 V (Red/Green) ADDITIONNAL INFORMATION ON LED COMPONENTS Tri-color (Typical) 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) Bi-color leds, by connecting the gold solder lug Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is (+) one color is produced, by reversing the supply produced. voltage another color is produced Bi-colors are available up to 28 VDC. AC products not SUPER BRIGHT LED INTENSITY available The tri-color led has red and green leds when LED COMPONENT SPECIFICATIONS both are connected yellow is produced Prominent and Flush Forward Voltage Recessed HE Red 5,000 mcd 1,300 mcd 2.2 V Green 10,000 mcd 1,200 mcd 3.3 V Yellow 4,000 mcd 350 mcd 2.0 V Blue 2,200mcd 280 mcd 3.3 V White 2,500 mcd 950 mcd 3.3 V Orange 4,000 mcd 500 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 6,000 mcd 980 mcd 2.2 V Green 1,900 mcd 300 mcd 3.3 V Yellow 1,600 mcd 250 mcd 2.0 V Orange 2,400 mcd 110 mcd 2.2 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS