R1507F20V00 Apem

R series Removable bezel trackball Distinctive features and specifications Available with 1.50 and 2.00 diameter ball Removable bezel Compact design Backlit illumination available Additional button strips available Environmental Protection Classification (IP Rating): contact factory MECHANICAL R150 R200 Ball Diameter: 1.50 (38.10mm) 2.00 (50.80mm) Ball Rotation: Continuous in all directions Continuous in all directions Tracking Force: 10g (0.35oz) 10g (0.35oz) Weight: 97g (3.42oz) 235.5g (8.31oz) Life Cycle (ball rotations): 5 million 5 million Operating Temperature: -40C to +85C (-40F to 185F) -40C to +85C (-40F to 185F) PROTOCOL OPTIONS AND ELECTRICAL SPECIFICATIONS CONFIGURATION OPTIONS USB: Input: 4.75V 5.25V 25mA max LED backlighting: Red, Blue, Green or (+30mA for backlit illumination option) Clear through a translucent Thermostat Output: USB 1.1 resin ball Additional pushbutton switch: Two, three or PS/2 (2/3BTN PS/2): Input: 5.00V 25mA max four* buttons (* USB only) see Button Strips (+30mA for backlit illumination option) Connector cables Output: CMOS/TTL Conformally coated PCB NOTE: All values are nominal. MOUNTING OPTIONS 180 horizontal to 90 vertical please specify when ordering. R ILLUMINATION SERIES MODEL PROTOCOL FORMAT MOUNTING RESOLUTION POWER (Ball Diameter) POSITION REQUIREMENT R Red 3 PS/2 (2/3 btn) 10 - 120 resolution B Blue 7 USB 20 - 240 resolution 150 1.50 (38.1mm) F - Level to 45 V00 5V Regulated G Green 30 - 480 resolution 200 2.00 (50.8mm) N - Level to 90 R00 RS-232* C Clear X - N/A (DTR & RTS) Black* *Microsoft Protocol only * Non-illuminated Note: The company reserves the right to change specifications without notice. APEM www.apem.comR series Removable bezel trackball 59.94 78.99 R150 R200 (2.36) (3.11) 53.59 72.90 (2.11) (2.87) 22.86 32.26 (0.90) (1.27) 68.33 Ball Diameter 15.24 78.99 52.83 Ball Diameter 15.49 59.94 2.00in (50.80mm) (2.69) (0.60) (3.11) (2.08) 1.50in (38.10mm) (0.61) (2.36) 31.75 21.59 (1.25) (0.85) 3.43 44.20 33.27 6.86 1.78 (0.135) (1.74) 54.10 (1.31) (0.27) (0.07) 39.12 (2.13) R3.96 (1.54) R3.18 52.83 68.33 (0.156) (0.125) (2.08) (2.69) 53.59 72.90 (2.11) (2.87) 14.61 9.65 (0.575) (0.38) 5.84 6.35 (0.23) (0.25) 51.18 4.57 8.13 (2.015) 20.32 38.35 27.69 (0.18) (0.32) (0.80) (1.51) (1.09) 28.70 36.58 (1.13) (1.44) 18.29 22.10 (0.72) (0.87) 8.38 8.89 (0.33) (0.35) 59.94 78.99 (2.36) (3.11) MOUNTING CUTOUT DIMENSIONS MOUNTING CUTOUT DIMENSIONS 72.90 (2.87) 53.59 (2.11) 26.42 34.16 Mounting (1.04) (1.345) Hardware: Four 4x40x1 Phl Flat Screws 2.79 26.42 34.16 3.43 (0.11) (1.04) (1.345) (0.135) BUTTON STRIP FEATURES Two, three, or four* (*USB only) buttons 5 million lifecycles rating at 500mA at 12VDC Tactile feedback Black or gray button caps Normally open momentary contact switch Choice of convex or concave design 37.08 (1.46) 4-40 Screw, Nut 20.32 4-40 Screw, Nut 15.24 13.97 18.54 (0.80) & Washer (2 Places) & Washer (2 Places) (0.60) (0.55) (0.73) 7.62 8.38 (0.30) (0.33) 15.24 16.76 + + + + (0.60) (0.66) 50.80 64.77 (2.00) (2.55) 61.21 73.66 (2.41) (2.90) Panel 13.97 Panel (0.55) 16.00 H (0.63) White White Gray Gray For Convex Buttons H = 20.32/(0.80) Green (Common) Black Green (Common) For Concave Buttons H = 19.30/(0.76) NOTE: All dimensions are in mm/(inch). Note: The company reserves the right to change specifications without notice. R150&200 JOYST1412R1US www.apem.com APEM +