SN101RS Apem

SN series Hall effect T-bar fader Distinctive features and specifications Consistent smooth feel Precision ball race bearings & PTFE guides Latest generation Hall effect sensor 12 bit resolution Barrel or Bullet aluminum handles Analog voltage or PWM output options Absolute positioning Industry standard mounting MECHANICAL MATERIALS Operating Force: 0.5N Body: Mineral filled nylon - Black Mechanical Angle of Movement: 63(31.5from center) Lever: Acetyl - Black Expected Life: 1 Million Operations Handle: Aluminum - Silver anodized Mass/Weight: 65g Screening Plates: Mild Steel - Zinc plated Package Size (mm) (L x W x H) or (Dia x H): 75 x 96 x 42mm ELECTRICAL SENSOR Lever Action (Centering): Friction Clutch Sensor: Hall effect ENVIRONMENTAL Output at Center: V/2 (5% x Gain) Power Supply: 5V 0.5V Transient free Operating Temperature: -20C to +70C (-4F to +158F) Reverse Polarity Max: -10VDC Storage Temperature: -40C to +70C (-40F to +158F) Overvoltage Max: 20VDC Sealing (IP): Not sealed. For internal applictions only. Output Voltage: 0V to 5V NOTES: (See gain options) Output Impedance: 10 All values are nominal. Current Consumption Typ: 13mA All specifications shown are based on a standard Load: Minimum 10K, preferred 100K+ configuration and are provided for guidance only. Please contact factory for assistance on how to achieve the best performance from your chosen configuration. SN Barrel Handle Bullet handle SERIES Output Polarity Handle S Barrel Handle 1 Analog S Standard N Bullet Handle 2 PWM R Reversed Gain Output Voltage Polarity Standard Reversed 01 50%xV Low Voltage High Voltage High Voltage Low Voltage 02 40%xV 03 30%xV 04 25%xV 05 10%xV Solder Lugs Solder Lugs Note: The company reserves the right to change specifications without notice. APEM www.apem.comSN series Hall effect T-bar fader Overview FRONT VIEW SIDE VIEW TOP VIEW 19.60 15.50 42.00 (0.77) (0.61) (1.65) Low Voltage High Voltage 4.30 (0.169) 5.00 31.5 31.5 58.90 (0.197) (2.32) 7.60 (0.30) 22.00 95.50 (0.866) (3.76) 32.50 36.60 (1.27) (1.44) 1 2 3 Solder Lugs 3 places: 1. +5V 6.35 (0.25) 2. Output 2 places Magnetic Screening 3. Ground Plates 75.00 (2.95) INSTALLATION DIMENSIONS 7.00 (0.276) 65.00 56.00 (2.56) (2.205) 4.50 (0.177) 3.75 (0.147) 2 off holes 3.20 (0.126) NOTES: Dimensions in mm/(inch). Images shown are for illustration purposes only. Note: The company reserves the right to change specifications without notice. www.apem.com APEM