02-Serie SMT TL-A 02-Serie SMT TL-A 30/10/14 14:53 Page4 SMT TL series Surface mount tiny washable toggle switches Distinctive features and specifications UG1410A Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials Tin plated ground plate Terminal coating : pure tin plating over nickel barrier A Terminals turned to the outside, preventing the shadow effect in infrared soldering and permitting visual inspection of solder joints Distance between case and circuit : 0,55 mm (.021) End stackable with 10,16 mm (.40) pitch Available with positioning pins to ensure switch orientation during the reflow process and increasing switch mechanical resistance Protected against electrostatic discharges (ESD) up to 10 KV Washable Construction withstands cleaning processes, including hot water under pressure ELECTRICAL SPECIFICATIONS PACKAGING 44.000.30 (1.732.011) Max. current/voltage rating with resistive load : 0,4VA 20V max. AC or DC Minimum load : 10mA 50mV or 10A 5VDC Initial contact resistance : 20 m max Insulation resistance : 1.000 M min. at 500VDC Dielectric strength : 1.000 Vrms. 50 Hz min. between terminals and frame 500 Vrms. 50 Hz min. between terminals Electrical life at full load : - 2 position switches : 60.000 cycles - 3 position switches : 30.000 cycles Static resistance : 10 KV (Schaffner equipment) 40.400.10 (1.590.003) GENERAL SPECIFICATIONS A Operating temperature : -40C to +85C Moisture resistance : 21days per IEC 512-6 test 11c Vibration resistance : 10-500 Hz / 10 g per IEC 512-4 test 6d Shock resistance : 50 g per IEC 512-4 test 6c MATERIALS Case : high temperature plastic material UL94-V0 13.000.25 3.00 Actuator : brass, nickel plated, with high temperature UL94-V0 plastic cap (.511 DIA.009) (.118) Ground plate and positioning pins : steel, tin plated Contacts : brass, gold plated Terminals : brass, with pure tin plating over nickel barrier 24.00 (.944) 44.00 (1.732) Tape width 24.40+2.00/0.00 44.40+2.00/0.00 Reel (.960+.078/.000) (1.748+.078/.000) (dimension A) SOLDERING AND CLEANING Reflow soldering : infrared, vapor phase or infrared convection Standard packaging unit : 700 pieces Washable per IEA-RS448-2 : Tape meeting international standard IEC - - water + detergent - preferred Publication 286-3 (EIA481A) - solvents Start leader : 400 mm min. Further information on reflow soldering : see end of catalogue. Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. The company reserves the right to change specifications without notice. A-4 www.apem.com APEM 360.00 Maxi Unrolling direction (14.173 DIA MAX) 12.00 (.472) 100.00 mini (3.937 DIA MIN)02-Serie SMT TL-A 02-Serie SMT TL-A 30/10/14 14:53 Page5 SMT TL series Surface mount tiny washable toggle switches With or without positioning pins Single pole Also available for vertical mounting. On request. A 1 2 3 Without positioning pins I II III 2.40 (.094 DIA) 24 III II I 3.80 4.60 (.149) (.181 DIA) 6.90 4.20 5.00 TL36WS84000 ON - ON (.271) (.165) (.196 DIA) 1.50 (.059) TL39WS84000 ON OFF ON TL37WS84000 MOM OFF MOM TL38WS84000 ON OFF MOM 32 1 TL32WS84000 ON - MOM 3.05 2.54 (.120) (.100) 0.50 0.80 (.019) (.031) 5.55 (.218) 2.54 8.10 (.100) (.318) I II III With positioning pins 2.40 (.094 DIA) 24 0.80 3.80 (.031 DIA) 4.60 III II I (.149) (.181 DIA) 6.90 4.20 (.271) 5.00 (.165) (.196 DIA) 3.81 TL36WS84065 ON - ON (.150) TL39WS84065 ON OFF ON TL37WS84065 MOM OFF MOM 1.50 32 1 2.54 (.059) 0.50 (.100) TL38WS84065 ON OFF MOM 1.00 (.019) (.039) TL32WS84065 ON - MOM 8.10 0.80 3.05 (.318) (.031) (.120) 5.08 5.55 (.200) (.218) 3.81 (.150) APEM www.apem.com A-5 10.16 5.15 10.16 5.15 (.400) (.202) (.400) (.202) 9.45 (.372) 5.50 (.216) 5.50 (.216) 0.65 (.025) 2.10 1.80 (.082) (.070) 3.05 (.120) 5.55 (.218) 2.10 7.96 1.80 7.96 (.082) (.313) (.070) (.313)