WMD1A Apex Tool Group

Weller Rework Stations WMD1D / WMD1A The multi application ability of this station makes it ideal for use in situations where the maximum amount of flexibility is required. The station has an in built air pump to provide air for the hot air pencil and also vacuum for the desoldering tools, and can be used to rework both surface mounted and through hole components. The WMD1S control unit is common to both stations, and incorporates a microprocessor controlled system to regulate the solder and desolder processes. The processor can also identify which tool is being used and calibrate the output automatically without the need for manual adjustment. All of the accessories listed below can be driven from the control unit. By use of the WCB1 and WCB 2 control boxes, additional functions can be programmed into the base unit such as, temperature lock, set back time, temperature offset, C / F, factory setting reset. Two versions are available: WMD 1D Desoldering Station WMD 1A Hot Air Station Consists of: Consists of: Control unit WMD 1S Control unit WMD 1S Desoldering set DS80UNC, 80 Watt Hot air pencil HAP 1, 100 Watt Order No. WMD 1D: Order No. WMD 1A: Product Code 332976 Product Code 332959 For more information please contact: Cooper Tools Pty Limited 519 Nurigong St Albury NSW 2640 Tel.: (02) 60580300 Fax: (02) 60217403 E-mail: coopertools coopertools.com Weller Repair Station WMD 1S Technical Data: Dimensions (LxWxH): 240 x 270 x 105 mm Mains voltage: 230 V 50 Hz Power input: 175 W Safety class: 1 and 3 Fuse: T800mA 5 x 20 Temperature control: Soldering / Desoldering iron: 50C 450C Hot air pencil: 50C 550C WSP 150: 50C 550C max. air: 20 l/min (hot air 10 l/min) max. vacuum: 0,7 bar The stations meet ESD requirements. Accesssories: Product Code 5 33 125 99 80W Soldering iron set WSP 80 335484 5 13 191 99 80W Desoldering tool DS 80 UNC - 5 33 127 99 80W Desoldering set DSV 80 UNC 333214 5 33 133 99 Desoldering tweezer set WTA 50 333810 5 33 135 99 150W Soldering iron set WSP 150 - 5 33 114 99 Hot air pencil HAP 1 (100W) 333420 5 27 040 99 Solder bath WSB80 335150 5 27 042 99 Solder bath WSB150 332979 5 25 030 99 Pre heating plate WHP 80 333403 5 31 181 99 Control box WCB 1 333802 5 31 180 99 Control box WCB 2 333816 DS Series Tips to suit DS80UNC Desolder Tools For more information please contact: Cooper Tools Pty Limited 519 Nurigong St Albury NSW 2640 Tel.: (02) 60580300 Fax: (02) 60217403 E-mail: coopertools coopertools.com