SPECIFICATIONS Material: E-SEELS: Silicone Rubber polymer type ASTM D1418 Notes: 1. Mounting screws are supplied in lengths shown unless otherwise Temperature Range : E-SEELS: -80F to +400F specified. Pressure Range : Dust tight and splashproof. 2. New sizes and types of RUBRGLAS-SEELS are being added Resistant to: Salt spray, weather, sunlight, ozone, corona and regularly. Please request other types and styles as required. most acids. Agency Recognition : Front Panel mounted Circuit Breaker Boots are Shelf Life: Excess of 25 years. UL-listed to UL Std. 50, types 1, 2, 3, 12, 12K, and 13. Back-of- Operational Life : 10,000 actuations, minimum. Panel mounted Circuit Breaker boots are UL-listed to UL Std. 50, type 1. Also meet CSA standards. CIRCUIT BREAKER NOTES: ORDER SEPARATELY 4 6-32 APM SEELSCREWS 3/8 LONG TOLERANCES: UNLESS OTHERWISE NOTED 1/32 WALL THICKNESS TOL. 0.010 CHANGED TO 0.005, HOLE DIM. 9/64 CHANGED TO 0.149 and ADDED SECTION C S. GOK 11.30.09 OF OBROUND HOLE B SPECIFICATION UPDATED TO CHANGED MAT L FROM ZZ-R-765 TO ASTM D1418 08.20.09 A CAD COMPUTER GENERATED 1-3-03 REV. DESCRIPTION DATE MAXIMUM AND MINIMUM MEASURE- ENG. MENTS ARE STATED DIRECTLY ON CIRCUIT BREAKER BOOT- EACH DIMENSION. DWN. CARBONE 6-13-69 MAT L: Silicon Rubber Polymer BACK-OF-PANEL MOUNTED CHKD. J. CELLA 08.20.09 type ASTM D 1418 SCALE (C1113/43) FINISH: APM-HEXSEAL CORPORATION 3 : 2 HEXSEAL THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.