Applied Motion Products, Inc. 1-800-525-1609 Product Datasheet 404 Westridge Dr. Tel (831) 761-6555 Watsonville, CA 95076, USA www.Applied-Motion.com 5017-009 NEMA 17 Step Motor Product Features Closeout sale in progress Single shaft only Limited quantity in stock 2-phase hybrid step motor Standard NEMA 17 dimensions 1.8 degree step angle Description Product Description: The 5017-009 stepper motor with single shaft (see Note below) is a two-phase hybrid step motor with a NEMA 17 frame size. The motor is no longer in production (and normally listed as archived on our website) but is being offered in a closeout sale to clear our inventory. Once the remaining inventory of this motor is depleted the motor will revert to being listed as archived on our website and will no longer be available for purchase. This makes the motor a good choice for one-time applications, research & development work, and hobbyist projects. Note: Only the single-shaft version of this motor is available for purchase in the closeout sale. The double-shaft version, 5017-009D, is not available. All sales are final.Specifications Part Number: 5017-009 Frame Size: NEMA 17 Motor Type: Standard torque Motor Length: 1.54 inches Number of Lead 6 Wires: Lead Wire flying leads, no connector Configuration: Lead Wire/Cable 12 inches inches Length: Lead Wire Gauge: 22 AWG Unipolar Holding 22.2 oz-in Torque: Bipolar Holding 31.4 oz-in Torque: Step Angle: 1.8 deg Bipolar Series 0.57 A/phase Current: Bipolar Series 15.0 Ohms/phase Resistance: Bipolar Series 26.0 mH/phase Inductance: Unipolar Current: 0.80 A/phase Unipolar Resistance: 7.5 Ohms/phase Unipolar Inductance: 6.5 mH/phase 2 Rotor Inertia: 3.82E-04 oz-in-sec Integral Gearhead: No Storage Temperature: -40 to 70 C Operating -10 to 40 C Temperature: Insulation Class: Class B (130 C) Shaft Run Out: 0.001 inch T.I.R. max Radial Play: 0.001 inch max w/ 4.4 lb load End Play: 0.001 inch max w/ 6.6 lb load Perpendicularity: 0.003 inches Concentricity: 0.002 inches