Applied Motion Products, Inc. 1-800-525-1609 Product Datasheet 404 Westridge Dr. Tel (831) 761-6555 Watsonville, CA 95076, USA www.Applied-Motion.com HT23-596 NEMA 23 High Torque Step Motor Product Features 2-phase hybrid step motor High torque design Standard NEMA 23 dimensions Series or parallel wiring Optimized for microstepping Description Product Description: The HT23-596 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series and bipolar parallel.Specifications Part Number: HT23-596 Frame Size: NEMA 23 Motor Type: High torque Part Number w/Double HT23-596D Shaft: Part Number HT23-596D-ZAA w/Encoder: Motor Length: 2.13 inches Number of Lead 8 Wires: Lead Wire flying leads, no connector Configuration: Lead Wire/Cable 18 inches inches Length: Lead Wire Gauge: 22 AWG Unipolar Holding 127 oz-in Torque: Bipolar Holding 177 oz-in Torque: Step Angle: 1.8 deg Bipolar Series 0.71 A/phase Current: Bipolar Series 14.4 Ohms/phase Resistance: Bipolar Series 44.0 mH/phase Inductance: Bipolar Parallel 1.41 A/phase Current: Bipolar Parallel 3.6 Ohms/phase Resistance: Bipolar Parallel 11.0 mH/phase Inductance: Unipolar Current: 1.00 A/phase Unipolar Resistance: 7.2 Ohms/phase Unipolar Inductance: 11.0 mH/phase 2 Rotor Inertia: 3.68E-03 oz-in-sec Integral Gearhead: No Weight: 1.32 lbs Storage Temperature: -30 to 70 C