8/23/2010 100WConstantCurrentLEDDriverwithDimmingLEDWCD100series FEATURES High Efficiency (Up to 92%) Active Power Factor Correction (Up to 0.99) Waterproof (IP67) Lightning Protection Over Voltage, Over Temp. & Short Circuit Protection UL, cUL 8750 & EN61347 Safety Regulations Very High MTBF & Life Time Dimming Option SPECIFICATION LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) LEDWC ( ) Model 100S035ST 100S045ST 100S070ST 100S105ST 100S140ST 100S175ST 100S210ST 100S245ST 100S280ST 100S315ST 100S357ST 100S420ST 350mA 450mA 700mA 1050mA 1400mA 1750mA 2100mA 2450mA 2800mA 3150mA 3570mA 4200mA Rated Current (1) Current Range (Min - Max) mA 332 - 368 428 - 472 665 - 735 1000 - 1100 1330 - 1470 1995 - 2205 2660 - 2940 3565 - 3935 4750 - 5250 2660 - 2940 3565 - 3935 3990 - 4410 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W 100W Rated Power 3% Pk -Pk Ripple & Noise (max.) (2) 286 Vdc 222 Vdc 143 Vdc 95 Vdc 72 Vdc 57 Vdc 48 Vdc 41 Vdc 36 Vdc 32 Vdc 28 Vdc 24 Vdc Max. Voltage 172V-286V 132V - 222V 86V - 143V 57V - 95V 43V - 71V 34V - 57V 29V - 48V 25V - 41V 22V - 36V 19V - 32V 17V - 28V 14V - 24V Voltage Range (Min - Max) 1% Line Regulation 5% Load Regulation 3 S Setup, Rise Time 10% When Power On or Off Output Overshoot / Undershoot 90V ~ 305VAC Voltage Range 47Hz / 63Hz Frequency Range 91% 91% 90.5% 90.5% 90.5% 90.5% 90.5% 90.5% 90% 90% 90% 90% Efficiency (Typ.) at 230Vac 65A 230VAC Input and 25C Inrush Current 1 mA max. at 277 Vac 50Hz input Leakage Current 1.3 A / 100VAC 0.6A / 220VAC AC Current (Typ.) Protection type : Hiccup mode, recovers automatically after fault condition is removed Short Circuit Protection 372V 289V 186V 124V 94V 74V 63V 53V 47V 42V 36V 31V Over Voltage (Typ.) Protection type : latch-off mode, Power supply must turn off and on again Operational - 35C ~ 65C Temperature Range Storage - 40 ~ +85C 10 ~ 100% RH Operational Humidity Storage 5 ~100% R.H UL8750 compliance to UL1310 Class2 UL1012 UL935, CAN/CSA-C22.2 (No. 0, No 107.1, No. 250.0) Safety Standards 1.0W 230 VAC input No load Power Dissipation I/P - O/P: 3KVAC (4242 DC) I/P - FG: 1.5KVAC (2121 DC) O/P-FG: 0.5KVAC (707 DC), 1 minute Withstand Voltage I/P - O/P, I/P - FG, O/P - FG: 100M Ohms / 500VDC Isolation Resistance EN55015 with 6db margin EMI Conduction & Radiation EN61000-3-2 , EN61000-3-3 Harmonic Current EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN 61547 EMS Immunity 350K HRS Compliance: MIL-HDBK-217F 25C ambient temp. MTBF (3) 100,000 hours 45C ambient temp. Life Time (3) 194*67.5*37.0 (mm) or 7.64*2.66*1.46 (inch) Dimension (L*W*H) 1000 g Weight Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 Others Safety & EMC Environmental Protections Input Output8/23/2010 Mechanical Specification BLACK (ACL) DIMMING CONTROL WIRE YELLOW (10V) (3*AWG 22) WHITE (ACN) PURPLE (0~10V) GREEN (GND) AC IN (3*AWG 18) GREEN (GND) RED (V+) BLACK (V-) DC OUT (2*AWG 18) NoneDimmingmodelwillnothavethe yellow,greenandpurplewires PIN ASSIGNMENT SHIPPING SPECIFICATIONS AC DC Dim ming CONNECTION Series UNITS PER CARTON CARTON WEIGHT Input Output Output PIN 1 LINE (Black) +V (Red) 10V (Yellow ) LEDWC-100 20.0 24Kg 52.8 Lbs PIN 2 NEUTRAL (White) -V (Black) (0-10V) Purple OUTER CARTON DIEMENSION WIDTH LENGTH HEIGHT PIN 3 GROUND (Green) GROUND (Green) Series inch 24.80 22.05 6.69 Connector Flying lead (stripped and tinned) LEDWC-100 mm 630.0 560.0 170.0 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 LEDWCD100 Model S035ST S045ST S070ST S105ST S140ST S175ST S210ST S245ST S280ST S315ST S357ST S420ST Efficiency 115VAC (min) (7) 88.0% 88.0% 87.5% 87.5% 87.5% 87.5% 87.5% 87.5% 87.0% 87.0% 87.0% 87.0% Efficiency 115VAC (typ) (7) 89.0% 89.0% 88.5% 88.5% 88.5% 88.5% 88.5% 88.5% 88.0% 88.0% 88.0% 88.0% Efficiency 230VAC (min) (8) 90.0% 90.0% 89.5% 89.5% 89.5% 89.5% 89.5% 89.5% 89.0% 89.0% 89.0% 89.0% Efficiency 230VAC (typ) (8) 91.0% 91.0% 90.5% 90.5% 90.5% 90.5% 90.5% 90.5% 90.0% 90.0% 90.0% 90.0% NOTES: 1. Measured at full load, 220VAC input and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth oscilloscope and the output paralleled a 0.1uf ceramic capacitor & 10 uf electrolytic capacitor. 3. For 1050mA output model, measured at 110VAC input, 80%load and 25 of ambient temperature. 4. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25 of ambient temperature. 5. Specifications are subject to change without notice. AUTEC cannot be held liable for errors or omissions or the consequences thereof. 6. A suffix -XXXX may be added to denote variation or modifications to the base product, were X can be any alphanumeric character or blank. 7. Measured at full load, 110Vac input, 25C ambient temperature, after the unit is thermally stabilized. It will be lower by , about 1%, if it is measured immediately after start up. 8. Measured at full load, 220Vac input, 25C ambient temperature, after the unit is thermally stabilized. It will be lower by , about 1%, if it is measured immediately after start up. Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777