13 February 2014 Page 1 FEATURES 100W DC Input Constant Current LED Driver LSDC-100 Series High Efficiency Operation From -35C~50C IP67 RoHS Com pliant Certified to CE SPECIFICATIONS Model Output Output No Load Output Ripple & Noise Efficiency Current Voltage Voltage 5% 24 LSDC-100S140SS 1400mA 35~72V 75V 0.38V 92% LSDC-100S175SS 1750mA 35~57V 60V 0.36V 93% LSDC-100S210SS 2100mA 35~48V 51V 0.33V 93% LSDC-100S245SS 2450mA 35~41V 44V 0.33V 93% Output Power 100W Set-up Delay Time 0.4~0.6s Line Regulation 3% Load regulation 5% Voltage 20~30V Inrush Current 11A Cols start, Vin=24V, Po=100W DC Current (24V) 4.5 A Full load, Vin=24V, Po=100W Over Voltage 1.3 Vo 5% floating deviation Protection type: Latch mode, recycle AC after resolving problem. Short Circuit Protection type: Latch mode, recycle AC after resolving problem. Temperature Range Operational -35C ~+50C Storage -40C~85C Humidity Operational 10~100% RH non-condensing Storage 5~100% RH MTBF 100,000 hours Life Time 60,000 hours Dimensions (L*W*H) 150*65.5*39.5mm Inches (L*W*H) 5.91*2.58*1.56 inches Weight 745 g Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 Others Environment Protections Input Output 13 February 2014 Page 2 Notes : 1. All specifications are typical at 25C unless otherwise stated. 2. The Efficiency values are measured at full load, after the unit is thermally stabilized, otherwise they will be lower about 1%. 3. The Ripple & Noise values are measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor. Mechan ical Specifications PART NUMBER SCHEME LSDC-100S210SS S= Class II, 2 Wire Input S= Metal Case L=LED Driver S Series Rated Current D=DC Input 20~30V Single Output C=Constant Current Rated Power (Watts) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AUTEC IS NOT RESPONSIBLE FOR ISSUES ARISING FROM ERRORS OR OMMISIONS Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777