9 October 2012 Page 1 WM24P Series 24W Wallmount Power Supply FEATURES High Efficiency (Up to 87%) LPS Compliant Universal Input Voltage Level V & COC V4.0 Efficiency White Case Option Short Circuit, Over Voltage and Overload Protection UL/cUL60950, EN60950, LPS & CE/LVD RoHS Compliant SPECIFICATION Model WM24P-xx-x-xx (See part number builder below) 5-24V Rated Voltage (1) Rated Power 20W(5V)-24W Ripple & Noise (2) 300mVp-p Current Range 0-4A (Max. 24W) Total Regulation +/- 5% Overshoot/Undershoot 10% Turn On Delay (Max.) 3s Hold-up Time 10ms 115Vac/60Hz max. load & 20ms 230Vac/50Hz Rated Voltage 100 ~ 240 Vac (90-264Vac Operational) Frequency Range 47Hz ~ 63Hz Efficiency 82% (Min.) Inrush Current 50A (At 100-240Vac input 25 Cold Start.) AC Current (Typ.) 0.75 A / 100-240 VAC Hiccup mode, no damage shall occur and the power supply shall restart when the fault condition is removed Short Circuit Over Voltage Latch mode, recycle AC to restart power supply Overload Hiccup mode, at 150% (Max.) rated load and the power supply shall restart when the fault condition is removed Operational 0C ~ 40C Temperature Range Storage - 20 ~ +70C Operational 20% ~90% R.H Humidity Storage 20% ~90% R.H Altitude Operational Will operate properly at altitudes between 0 to 10000ft Safety Standards UL/cUL60950, TUV60950, LVD, LPS & CE No load Power < 0.3W Dissipation Insulation Resistance Input to output: Min. 10M OHM at 500 VDC. Dielectric Strength Primary to Secondary: DC 4525 V , 5mA Max , for 3 seconds Conducted & EN 55022 Class B, CISPR22 Class B and FCC part 15 Class B Radiated EMI EMS EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11 Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 Safety & EMC Environment Protections Input Output 9 October 2012 Page 2 MTBF 50,000 hours (Measured at 110Vac input, 100% Load and 25C ambient temperature (MIL-HDBK-217F)) Burn-in 2-4 Hours (Min.) at 40C (+/-5%) at full load with cycling Dimension (L*W*H) 77.9 55.6 33 mm (+/-0.5mm) 3.06 2.18 1.29 inch (US Design) 1800mm Output Cable Weight 255 g RoHS Complies with EU Directive 2011/65/EU WEEE Complies with EU Directive 2002/96/EC EISA 2007 Complies with requirements for external power supplies. Complies with EU Code of Conduct on external power supplies EU Notes 1. Output voltage tolerance +/-5% 2. Max., Measuring is done by 20MHz bandwidth oscilloscope and terminated each output with a 22uF aluminum electrolytic capacitor and a 0.1uF ceramic capacitor. Full load, 25C ambient temperature at 115Vac and 230 Vac. WM24P-xx-x-xxz z = W for White case or blank for black WM = Wallmount Series xx = Output Connector, add A for ferrite 24 = Power: 24 Watts P = Manufacturing Location A = US AC Plug B = AUS/NZ AC Plug C = UK AC Plug (Plastic GND) xx = Output Voltage: 05-24Vdc D = EU AC Plug Autec Power Systems Tel: (805)522-0888 www.autec.com 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 Others