BJ Series Compact and Long sensing distance Features Long distance sensing type Long sensing distance with high quality lens Long sensing distance : Through-beam type 15m, Diffuse reflective type 1m, Polarized retroreflective type 3m(MS-2A) M.S.R.(Mirror Surface Rejection) function (Polarized retroreflective type) Compact size: W20H32L10.6mm Protection structure IP65/IP67(IEC standard) Light ON/Dark ON selectable by VR (MS-2A) Sensitivity adjustment VR incorporated Built-in reverse power polarity, output short, overcurrent protection circuit Mutual interference prevention function Connector type (Except through-beam type) Improved noise resistance and minimize effect of disturbance light Please read Caution for your safety in operation manual before using. Specifications The model name with -C is connector type. Type Long distance sensing type NPN open BJ15M-TDT BJ10M-TDT BJ3M-PDT BJ1M-DDT BJ300-DDT BJ100-DDT BJ7M-TDT collector output BJ15M-TDT-C BJ10M-TDT-C BJ3M-PDT-C BJ1M-DDT-C BJ300-DDT-C BJ100-DDT-C PNP open BJ15M-TDT-P BJ10M-TDT-P BJ3M-PDT-P BJ1M-DDT-P BJ300-DDT-P BJ100-DDT-P BJ7M-TDT-P collector output BJ15M-TDT-C-P BJ10M-TDT-C-P BJ3M-PDT-C-P BJ1M-DDT-C-P BJ300-DDT-C-P BJ100-DDT-C-P Polarized Sensing type Through-beam Diffuse reflective retroreflective 1 1m 300mm 100mm 0.1 to 3m Sensing distance 15m 10m 7m (Non-glossy white (Non-glossy white (Non-glossy white (MS-2A) paper 300300mm) paper 100100mm) paper 100100mm) Opaque material Opaque material Sensing target Opaque material over 12mm Translucent, opaque materials over 8mm over 75mm Hysteresis - Max. 20% at sensing distance Response time Max. 1ms Power supply 12-24VDC10%(Ripple P-P: Max.10%) Current consumption Emitter/Receiver: Max. 20mA Max. 30mA Infrared LED Red LED Red LED Red LED Infrared LED Red LED Infrared LED Light source (850nm) (660nm) (650nm) (660nm) (850nm) (660nm) (850nm) Sensitivity adjustment Built-in the adjustment VR Operation mode Light on/Dark on selectable by VR NPN or PNP open collector output Control output Load voltage: Max. 26.4VDC Load current: Max. 100mA Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V Protection circuit Reverse polarity protection, output short-circuit protection, interference prevention function(Except through-beam type) Indicator Operation: Red, Stable: Green(Emitters power indicator: Green) Insulation resistance Max.20M(at 500VDC megger) Noise resistance 240V the square wave noise(pulse width:1 ) by the noise simulator Dielectric strength 1000VAC 50/60Hz for 1minute 2 Vibration 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours 2 Shock 500m/s (approx. 50G) in each of X, Y, Z directions for 3 times Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx(Receiver illumination) Ambient temperature -25 to 55, storage: -40 to 70 Ambient humidity 35 to 85%RH, storage: 35 to 85%RH Protection BJ - IP65(IEC standard), BJ-C - IP67(at non-dew status) Material Case: PC+ABS, LED Cap: PC, Sensing part: PMMA 2 BJ: 3.5, 3-wire, Length: 2m(Emitter of through-beam type: 3.5, 2-wire, Length: 2m) Cable (AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: 1) Common Mounting bracket, Bolt, Nut, VR adjustment driver Accessory Individual - Reefl ctor(MS-2A) - Approval BJ: Approx 60g Unit weight BJ: Approx. 90g, BJ-C: Approx. 20g BJ: Approx. 45g, BJ-C: Approx. 10g BJ-C: Approx 30g 1: The sensing distance is extended to 0.1 to 4m or 0.1 to 5m when using optional reflector MS-2S or MS-3S. 2: M8 connector cable is sold separately. (Cable - AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: 1.25) The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment. A-12 Environ- Model mentLong sensing distance/BGS reefl ctive/Micro spot type (A) Transparent glass sensing/BGS reflective/Micro spot type Photo electric sensor Features (B) BGS reflective type Fiber optic Adopts BGS method superior than convergent reflective sensor to minimize error by background, or color, material of (C) sensing object for stable sensing by adjusting the volume Door/Area Visible light source to check the position of sensing spot and small spot sensor minimizing effect of the ambient objects with narrow sensing width Transparent glass (D) Transparent glass sensing type / Micro spot type sensing type Proximity sensor Stable sensing for transparent object(LCD, PDP, glass etc) BGS reflective by BJG30-DDT type (E) Easy to check sensing location with visible micro spot(BJN Series) Pressure sensor Detects tiny objects (min. sensing target 0.2mm copper wire) (Spot size) Commonness 5.0/4.5/6.5mm (F) Compact size: W20H32L10.6mm Rotary encoder Protection structure IP65(IEC standard) Light ON/Dark ON selectable by VR(Except BJG30-DDT) (G) Sensitivity adjustment VR incorporated(Except BJG3 DDT) Connector/ Socket Built-in reverse power polarity, output short, overcurrent protection circuit Mutual interference prevention function(Except BGS reflective type) (H) Micro spot type Improved noise resistance and minimized effect of disturbance light Temp. controller Please read Caution for your safety in operation Spot is visible with bare eyes (Spot size) manual before using. while beam(line) is not. (I) 2.0/2.5mm SSR/ Power Specifications controller Type Transparent glass sensing type BGS reflective type Micro spot type (J) NPN open collector output BJG30-DDT BJ30-BDT BJ50-BDT BJ100-BDT BJN50-NDT BJN100-NDT Counter PNP open collector output- BJ30-BDT-P BJ50-BDT-P BJ100-BDT-P BJN50-NDT-P BJN100-NDT-P Sensing type Diffuse reflective BGS reflective Narrow beam reflective (K) 30mm 15mm 10 to 30mm 10 to 50mm 10 to 100mm Timer (Non-glossy (Transparent (Non-glossy (Non-glossy (Non-glossy Sensing distance 30 to 70mm 70 to 130mm white paper glass 5050mm, white paper white paper white paper 100100mm) t=3.0mm) 5050mm) 5050mm) 100100mm) (L) Panel Transparent glass, meter Sensing target Translucent, opaque materials Translucent, opaque materials opaque materials, translucent (M) Min.diameter of Approx. Approx. Approx. Approx. Approx. Tacho/ - transmitting SPOT 5.0mm 4.5mm 6.5mm 2.0mm 2.5mm Speed/ Pulse meter Min.sensing target - Approx. min. 0.2mm(Copper wire) Max. 25% at Max. 20% at (N) Hysteresis Max. 20% at sensing distance Max. 10% at sensing distance Display sensing distance sensing distance unit Response time Max. 1ms Max. 1.5ms Max. 1ms Power supply 12-24VDC 10%(Ripple P-P: Max.10%) (O) Sensor Current consumption Max. 30mA controller Light source/Wavelength Infrared LED(850nm) Red LED(660nm) Red LED(650nm) (P) Sensitivity adjustment - Built-in the adjustment VR Switching mode power Operation mode Light ON fixed Light ON / Dark ON selectable by VR supply NPN open collector output NPN or PNP open collector output (Q) Load voltage: Max. 26.4VDC Stepper Control output Load voltage: Max. 26.4VDC Load current: Max. 100mA motor& Load current: Max.100mA Residual voltage - NPN: Max. 1V, PNP: Min. 2.5V Driver&Controller Residual voltage: Max. 1V Protection circuit Reverse polarity protection, output short-circuit protection, interference prevention function(Exept BGS reefl ctive type) (R) Graphic/ Indicator Operation indicator: red, Stability indicator: green Logic panel Insulation resistance Min. 20M(at 500VDC megger) (S) Noise resistance 240V the square wave noise(pulse width:1) by the noise simulator Field network Dielectric strength 1,000VAC 50/60Hz for 1minute device 2 Vibration 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours 2 Shock 500m/s (approx. 50G) in each of X, Y, Z directions for 3 times (T) Software Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx(Receiver illumination) Ambient temperature -25 to 55, storage:-40 to 70 (U) Ambient humidity 35 to 85%RH, storage: 35 to 85%RH Other Protection IP65(IEC standard) Material Case: PC+ABS, LED Cap: PC, Sensing part: PMMA Cable 3.5, 3-wire, Length: 2m(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: 1) Accessory Mounting bracket, Bolt Mounting bracket, Bolt, Adjustment driver Approval Unit weight Approx. 45g Approx. 50g Approx. 45g The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment. A-13 Model Environ- ment