FOD Receiver Users Guide Rev 3, 07/18/2013 Copyright 2013, AVID Technologies, Inc. 2112 Case Parkway South, Twinsburg, Ohio 44087 Phone 330.487.0770 E-Mail: wirelesspower avid-tech.com Website: www.avid-tech.com AVID Technologies, Inc. FOD Receiver Users Guide Page 2 General Description The AVID FOD (Foreign Object Detection) Receiver is a standard WPC V1.1 wireless power receiver (5.0W) that has been calibrated and characterized to accurately measure and report received power information. This RX device is useful for testing transmitter devices, for characterizing and optimizing V1.1 (and newer) transmitters FOD functionality, and for doing Qi pre-compliance testing. Here are the main features of the AVID FOD Receiver: - Fully functional V1.1 Qi Receiver - Uses naked RX coil as specified for TPR 5 in the WPC Part 3 spec. Coil is isolated from the electronics and mounted in plastic frame that mates with the foreign object holders for good alignment - Factory calibrated and characterized using calibrated AVID FOD Transmitter - Accurately measures and reports PPR (received power) values per WPC V1.1 spec - Calculates and sends additional 16-bit PPR values (proprietary packet 0x28) that can be decoded and reported using the AVID FOD Transmitter and AVID V1.1 Sniffer - Programmable PPR offset and internal loads (DIP switch settings) - External load board (included) has minimum, maximum and in-between loads for testing and characterizing transmitters and for running Qi pre-compliance tests - Supports internal loads up to 2.0 Watts in 0.25 Watt increments (DIP switch settings) and external loads up to 5.0 Watts maximum. AVID FOD Receiver, Top View Copyright 2013, AVID Technologies, Inc. 2112 Case Parkway South, Twinsburg, Ohio 44087 Phone 330.487.0770 Website: www.avid-tech.com E-Mail: wirelesspower avid-tech.com