BB-232CDT BB-9PCDT RS-232 Data Taps Features Monitor and record serial data streams Easy to install, may be left in place Transparent connections No external power required CE / RoHS-3 BB-232CDT BB-9PCDT Introduction Ordering Information Tap in on a serial data stream and transparently feed another monitor, printer or other Model No. Straight Through Connectors Monitoring Porrt device. BB-232CDT (1) DB25 Male, (2) DB25 Female DB25 Female Model BB-9PCDT allows an RS-232 port to tap into and check data being transmitted between two other RS-232 ports. DIP switches set programming to monitor the main BB-9PCDT (1) DB9 Male, (1) DB9 Female DB9 Female Transmit and Receive lines individually or together. Choose between monitoring the DCE or DTE port. Also allows the monitoring port to be either DTE or DCE. The DTE connector is male, and DCE and TAP connectors are female. Accessories Sold Separately BB-9PAMF6 - DB9 male to DB9 female cable, 1.8 m (6 ft) Model BB-232CDT has DIP switches that allow you to monitor the main Transmit and BB-232AMF5 - DB25 male to DB25 female cable, 1.8 m (6 ft) Receive lines individually or together. The male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the device in series with the RS-232 line to be tapped. Specifications Serial Technology RS-232 Straight-through ports: (1) DB9 male, (1) DB9 female BB-9PCDT Monitoring port: DB9 female Straight-through ports: (1) DB25 male, (2) DB25 female BB-232CDT Monitoring port: (1) DB25 female Installation In-line Mechanical BB-9PCDT: 63.5 gm (0.14 lb) Weight BB-232CDT: 90.7 gm (0.2 lb) Environmental Operating 0 to +70 C (+32 to +185 F) Temperature Storage Temperature -40 to +85 C ( -40 to +185 F) Operating Humidity 0 to 95%, non-condensing Meantime Between Failures (MTBF) MTBF, BB-232CDT 2010454 hours MTBF, BB-9PCDT 3438790 hours Calculation Method Parts Count Reliability Prediction Regulatory Approvals / Standards / Directives 2011/65/EU amended by (EU) 2015/863 Reduction of Hazardous CE - Directives Substances Directive (RoHS) 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE) NOTE: EMC Directive 2014/30/EU, Section 12, states:This Directive should not regulate equipment which is inherently benign in terms of electromagnetic CE - Standards compatibility Thus, neither the EMC Directive nor emissions and immunity EMC standards apply to this product. BB-USOPTL4-2P BB-USOPTL4-4P 0221ds All product specifications are subject to change without notice. BB-232CDT BB-9PCDT 0321dsBB-232CDT BB-232CDT BB-9PCDT BB-9PCDT Dimensions BB-232CDT Dimensions BB-9PCDT