BB-485OI9TB Isolated Serial Converter Features Converts RS-232 data signals to RS-422/485 1500V optical isolation for data lines and ground Data rate: up to 9600 bps Inline installation 10 to 14 Vdc power supply (required, not included, sold separately) cULus, FCC, CE Introduction Ordering Information Model BB-485OI9TB, isolated converter, converts unbalanced, full-duplex RS-232 Model No. RS-232 Connecter RS-422/485 Connector signals to balanced full-duplex (4-wire) RS-422/485 or half-duplex (2-wire) RS-485 signals. BB-485OI9TB DB9 Female Terminal Block The converter provides 1500 Volts RMS optical isolation for data lines and ground (and connected devices) between the RS-232 and RS-422/485 signals. RS-232 port has a Accessories Sold Separately female DB9 connector. RS-422/485 port has a 6-position terminal block. BB-SMI6-12-V-ST Power supply, 12 Vdc 6 Watt, stripped and tinned, international AC input, international AC blades The RS-232 side of the converter draws power from the handshake lines (DTR, RTS). At BB-9PAMF6 - 1.8 m (6 ft) RS-232 serial cable least one handshake line must be asserted (raised high) to power the RS-232 side. The BB-MMNM9 - DB9 male to DB9 male null modem adapter RS-422/485 side must be powered by an external 12 Vdc power supply (not included, sold separately). Specifications Mechanical Serial Technology Data Rate 9600 bps Enclosure Material Plastic RS-232 Connector DB9 female (DCE) Dimensions 5.5 x 8.3 x 1.7 cm (2.2 x 3.3 x 0.7 in) RS-232 Signals TD, RD, GND Mounting Inline installation Environmental RS-422/485 Connector Terminal block Operating Temperature 0 to +50 C (+32 to +122 F) RS-485, 2-Wire Data A (-), Data B (+), GND RS-422/485, 4-Wire TDA(-), TDB(+), RDA(-), RDB(+), GND Storage Temperature -40 to +85 C (-40 to +185 F) Isolation Operating Humidity 0 to 95%, non-condensing Lines Protected Data lines Meantime Between Failures (MTBF) MTBF 272581 hours Method Optical MTBF Method MIL 217F Parts Count Reliability Prediction Rating 1500 V Terminal Block Regulatory Approvals / Standards / Directives Wire Size 26 to 16 AWG Approvals FCC, CE, cULus File Number: E222870 2014/30/EU Electromagnetic Compatibility Directive Torque 2.0 lb fin 2011/65/EU Amended by (EU) 2015/863 Reduction of Hazardous Power Note: Requires Two (2) Power Sources CE Directives Substances Directive (RoHS) RS-232 Source Port-powered from DTR and RTS handshake lines 2012/19/EU Waste Electrical and Electronic Equipment (WEEE) RS-422/485 Source External power supply (not included, sold separately) EN 55032 (Class B) - Electromagnetic Compatibility of Multimedia RS-422/485 Connector Terminal block Equipment Emission Requirements CE Standards RS-422/485 Consumption 0.9 W EN 55024 Information Technology Equipment Immunity Characteristics Limits and Methods of Measurement RS-422/485 Source External power supply (not included, sold separately) EN 61000-6-1 Generic Immunity Standard for Residential, IEC Standards Commercial and Light-industrial Environments BB-USOPTL4-2P BB-USOPTL4-4P 0221ds All product specifications are subject to change without notice. BB-485OI9TB 2221dsX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Interface Modules category: Click to view products by B&B Electronics manufacturer: Other Similar products are found below : IFD8520 cPCI-3544 422CON ATX6022/14GP7 ATX6022/8 AX93221-24/48 FC6A-EXM2 OPT8AP-AE 96RMKVM-19V1C-A 60016- 011 60016-014 60006-008 60011-075 HPCI-14S12U cBP-3208 cBP-3062A FAB205-6P5 ATX6022/6 60016-012 96RMKVM-17V1C-A MOS-1120Y-0201E 96RMLCD-17V1-A 96RMKVM-17V8C-A 60004-005 60016-017 60006-009 60016-035 60016-034 60016-031 60016-030 60016-026 60016-024 60016-018 60016-007 60016-005 60007-002 60006-010 AXX10GBTWLHW3 382-BBEH 555-BDCL K6CMISZBI52 426451401-3 60011-093 MIC-3620/3-BE MPCIE-UART-KIT02-R20 RSM232 PCIE-1680-AE BB-FOSTCDRI 73-544-002 UC-313