Serial to Single-mode Fiber Optic Converters Models BB-FOSTCDRi-ST, BB-FOSTCDRi-SC www.advantech.com FEATURES Converts serial data signals to single-mode fiber, up to 15 km (9 mi) range 2000V 3-way optical isolation (input, output, power) EMI/RFI protection Data rates up to 115.2 kbps Wide operating temperature: -40 to +80 C DIN mount, IP30 plastic case UL 508 rated 1048 VDC external power source required (not included, sold separately) Modbus ASCII/RTU compatible Advantech ILinx fiber converters are designed with the functionality required for ORDERING INFORMATION heavier industrial environments. These isolated converters change RS-232, RS- MODEL NUMBER SERIAL CONNECTOR FIBER CONNECTOR MODBUS 422 or RS-485 to single-mode fiber optics. Fiber optic connectors are SC or ST . BB-FOSTCDRi-SC Terminal Blocks, removable Single-mode SC BB-FOSTCDRi-ST Terminal Blocks, removable Single-mode ST BB-FOSTCDRi-Sx models extend serial data ranges up to 15 km (9 mi) and provide the most versatile connection possible between asynchronous full or half-duplex serial equipment. In addition to direct point-to-point connectivity, it is capable of operating in multi-drop mode. This allows one serial device to ACCESSORIES sold separately communicate with up to 31 others around a fiber optic ring. Since it supports BB-MDR-20-24 - 24 Vdc 1.0 A DIN rail mount power supply, slim-line mixed serial standards, it can replace other converters and isolators and add the BB-SMI18-12-V-ST 12 Vdc 1.6A power supply, stripped/tinned, international blades EMI/RFI immunity inherent to fiber optic communications. BB-TBKT1 - Replacement Terminal Block - 2-position, 5.08mm, 8A, 30 The Automatic Send Data Control circuit controls the RS-422/485 driver chip, BB-TBKT2 - Replacement Terminal Block - 5-position, 5.08mm, 8A, 30 eliminating the need for special software. Easy to install and configure, it has a 12-position DIP switch to set up RS-422/485 parameters and removable terminal blocks to connect serial signals and power. In RS-232 mode, it supports Transmit Data and Receive Data. Handshaking signals are not passed through. An external 10-48 VDC power source is required (not included, sold separately). Fiber Optic Benefits Fiber optic cable carries serial data up to 15 kilometers (9 mi), much farther and reliably than conventional copper lines. Power surges, spikes and groupd loops are created by electrical equipment, by nearby lightning strikes, and from other sources. They are easily picked up by copper data lines and transmitted to connected devices, garbling data communications and damaging equipment. However, fiber optic data transmission uses light in glass fiber cable as a communication medium. Being inherently non-electric, fiber optic cable will not pick up noise and provides the most reliable system possible ideal for spanning areas with severe interference, such as near heavy electrical equipment, welding or radio transmissions. It does not transmit power spikes or surges and prevents ground loops by not providing a conductive path for the ground. All product specifications are subject to change without notice. BB-FOSTCDRi-ST, BB-FOSTCDRi-SC 2220ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.comSerial to Single-mode Fiber Optic Converters Models BB-FOSTCDRi-ST, BB-FOSTCDRi-SC SPECIFICATIONS SERIAL TECHNOLOGY INDUSTRIAL BUS Data Rate 9.6 to 115.2 kbps Modbus ASCII/RTU RS-232 MECHANICAL Connector Removable terminal block (12 to 28 AWG) LED Indicators FO Receive, FO Transmit, Power Signals TD, RD, GND Dimensions 12.8 x 9.7 x 2.8 cm (5.0 x 3.8 x 1.1 in) RS-422/485 Enclosure IP30, Plastic, 35mm DIN mount Connector Removable terminal block (12 to 28 AWG) Weight 149.7 gm (0.3 lb) RS-485, 2-wire Data A(-), Data B(+), GND ENVIRONMENTAL RS-422/485, 4-wire TDA(-), TDB(+), RDA(-), RDB(+), GND Operating Temperature -40 to +80 C (-40 to +176 F) ISOLATION Storage Temperature -40 to +85 C (-40 to +185 F) Isolation 3-way, 2KV isolation Operating Humidity 0 to 95%, non-condensing Surge Protection 600 W peak power dissipation MEANTIME BETWEEN FAILURE (MTBF) Clamping Time < 1 pico-second MTBF 671969 hours FIBER OPTIC TECHNOLOGY MTBF Calculation Method MIL 217F Parts Count Reliability Prediction Connector ST or SC APPROVALS, DIRECTIVES, STANDARDS FCC Part 15, CISPR, CE Type / Wavelength Single-mode / 1310 nm UL 508, File Number: E222870 Output Power (-) 15 to (-) 8 dBm 2014/30/EU - Electromagnetic Compatibility Directive Receive Sensitivity Less than or equal to (-) 32 dBm 2011/65/EU amended by (EU) 2015/863 Reduction of Hazardous Substances Directive (RoHS) Cable 9/125 micro-meter CE - Directives 2012/19/EU Waste Electrical and Electronic Equipment Data Rate 9.6 to 115.2 kbps (WEEE) Maximum Distance 15 km (9 mi) EMC: POWER EN 55032 - Class B Electromagnetic compatibility of Power Source External, required (not included, sold separately) multimedia equipment Emission requirements CE - Standards EN 55024 - Information Technology Equipment Immunity Input Voltage 10 to 48 VDC (Class 2) Characteristics Limits and Methods of Measurement Power Consumption 1.4 Watts EN 61000-6-3 & A1 Class B Generic Emission Standard for Connector Removable terminal block (12 to 28 AWG) Residential, Commercial and Light-industrial Environments Standards - other EN 61000-6-1 Generic Immunity Standards for Heavy Industrial Environments EMC: EN 61000-6-2 - Generic Immunity Standard for (Heavy) BB-FOSTCDRI-ST only Industrial Environments MECHANICAL DIAGRAM BB-FOSTCDRI-SC 2.8 cm 1.1 in 12.8 cm 5.0 in 9.7 cm 3.8 in Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.com