Three-stage DIN Rail Surge Protector HESP4DR www.advantech-bb.com PRODUCT FEATURES Three stages of protection on every data line 1) Gas discharge tube 2) Series resistor 3) Transient voltage suppressor Protected signal ground connection Rugged terminal block connections Dedicated chassis ground lug Wide operating Temperature NEMA TS2 Model HESP4DR protects against lightning strikes, power surges, and other ORDERING INFORMATION MODEL types of voltage disturbances with three stages of protection for each line: INTERFACE LINES PROTECTED MOUNTING NUMBER a gas discharge tube followed by a series resistor and finally a Transient HESP4DR RS-422/485 (5) RS-422/485 DIN Rail Mount Voltage Suppresser (TVS). Five RS-422/485 signals on terminal blocks are supported with a clamping voltage of 6.8 Volts. ACCESSORIES The surge protector is housed in a rugged DIN rail mount case with a CU15B - Copper Grounding Strap protected signal ground connection and dedicated chassis ground lug. In order to work properly, it is important to have a good connection between the 10 grounding screw and a solid earth ground. IN THE FIELD Learn more about surge suppression & isolation www.advantech-bb.com/TechLibrary Parking Lot Security Industry: Transportation Intelligent Parking Isolation: Your Best Investment for Reliability Product: High Energy Surge Protector Dataline Isolation Theory Dataline Surge Protection All product specifications are subject to change without notice. HESP4DR 1317ds orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 7924457.88 cm 3.1 in Three-stage DIN Rail Surge Protector HESP4DR SPECIFICATIONS SERIAL TECHNOLOGY ENVIRONMENTAL Connectors, line 5-position terminal blocks Operating Temperature -40 to 80 C (-40 to 176 F) Connectors, equipment 5-position terminal blocks Storage Temperature -40 to 85 C (-40 to 185 F) SURGE SUPPRESSION Operating Humidity 0 to 95% Non-condensing Clamping Voltage 72 VDC, minimum APPROVALS / CERTIFICATIONS - HESP4DR - stage 1 108 VDC, maximum Series Resistance CE, NEMA TS2 2.7 Ohms - stage 2 2011/65/EU - Reduction of Hazardous Substance Directive Clamping Voltage 6.45 VDC, minimum - stage 3 7.14 VDC, maximum 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE) -9 Clamping Time Less than 5 x10 seconds MECHANICAL Dimensions 3.55 x 7.88 x 10.53 cm (1.4 x 3.1 x 4.2 in) Installation DIN rail mount Weight 0.114 kg (4.02 oz) MTBF 862813 hours MTBF Calc. Method MIL 217F, Parts Count Reliability Prediction Method MECHANICAL DIAGRAM 10.53 cm 4.2 in 3.55 cm 1.4 in orders advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445