EIR418-2SFP-T-0812ds page 1/3 2009 B&B Electronics. All rights reserved Elinx EIR418-2SFP-T 18 Port Gigabit Industrial Ethernet Switch with 2 RJ-45/SFP Combo Ports for Gigabit Ethernet 16 10/100 Base-T Ethernet Ports 2 RJ-45/SFP Combo Ports for Gigabit Ethernet 3000V EFT & 6000V ESD Protection Dual 12 to 48 VDC Power Inputs Wide Operating Temperature The EIR418-2SFP-T is an 18 Port Unmanaged Industrial Gigabit Ethernet Switch. In addition to 16 standard copper RJ-45 ports, it has 2 SFP Combo slots to accommodate Gigabit Fiber. Small Form-factor Pluggable (SFP) Port: The SFP Port provides flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper. High-Speed Transmissions: The EIR418-2SFP-T includes a switch controller that automatically senses transmission speed (10/100/1000 Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol. Dual Power Input: To reduce the risk of power failure, the EIR418-2SFP-T provides two 12 to 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open. Flexible Mounting: The switch features an IP30 metal enclosure that can be DIN or Panel mounted. Transient Protection: The power line input on the EIR405-T offers protection from up to 3,000 V EFT. The Ethernet ports offer Ordering Information Model Number Description up to 6,000 V ESD protection. These features make the switch EIR418-2SFP-T Industrial Gigabit Switch (16 CU, 2 SFP) reliable and suitable for use in harsh electrical environments. Accessories SFP-100FX-M-2KM-T SFP 100Base-FX, MM 2KM, LC Wide Operating Temperature: With an operating temperature of SFP-100FX-S-30KM-T SFP 100Base-FX, SM 20KM, LC SFP-1000SX-M-550M-T SFP 1000Base-FX, MM 550M, LC -40 to 75C (-40 to 167 F), this switch is suitable for use in harsh SFP-1000LX-S-10KM-T SFP 1000Base-FX, SM 10 KM, LC industrial environments. SFP-1000LX-S-20KM-T SFP, 1000Base-FX, SM 20 KM, LC MDR-60-24 24VDC, 2.5A DIN Mount Power Supply Easy Troubleshooting: There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power (P1, P2 and Fault) show power status. Specifications These indicators allow you to quickly diagnose and correct Regulatory problems and ensure your network remains reliable. Approvals FCC, CE, UL UL File Number: E173795 Free Fall IEC60068-2-32 B&B Electronics Elinx Brand Ethernet Switches are your Shock IEC60068-2-27 number one choice for reliable performance in harsh industrial Vibration IEC60068-2-6 environments. www.bb-elec.com orders bb-elec.com support bb-elec.com International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS EIR418-2SFP-T-0812ds page 2/3 2009 B&B Electronics. All rights reserved Specifications IEEE Standards Power IEEE 802.3 802.3. 10Base-T Ethernet Input Voltage Dual 12 to 48 VDC Inputs IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet Reverse Polarity Protection IEEE 802.3ab 1000Base-T Power Connection Removable Terminal Block IEEE 802.3x Flow Control and Back Pressure Wire Size 12 to 24 AWG Network Specifications Power Use 9.0 Watts Architecture Back-plane (Switching Fabric): 7.2 Gbps Fault Output 1 Relay Output Normally Closed Throughput (Full-dux): 10.7 Mpps 64bytes EFT Protection 3000 V EFT Protection Transfer Rate 14,880 pps Ethernet Port Environmental 148,800 pps Fast Ethernet Port Op. Temp - 40 to 75C (-40 to 167F) 1,488,000 pps Gigibit Fiber Ethernet Storage Temp - 40 to 85C (-40 to 185F) Buffer 1 MB Op. Humidity 0 to 95% MAC Table 8K Mechanical Miscl Broadcast Storm Filtering Enclosure IP30 Metal Enclosure CSMA/CD Mounting 35mm DIN Rail or Panel Mount Attachments Interface Dimensions 2.86x4.19x6.06 in (7.26x10.64x15.39 cm) RJ-45 Ports 16 x10/100 BaseT, Auto MDI/MDI-X ESD Protection 6000V ESD Protection SFP 2 x Mini-GBIC SFP Combo Ports (or 2 RJ-45 10/100/1000 BaseT) LED Indicators P1 (Power 1), P2 (Power 2), Fault (Power Fault), LINK/ACT (SFP Ports) RJ-45 Ports have 2 LEDs to indicate LINK and activity www.bb-elec.com orders bb-elec.com support bb-elec.com International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS