Zlinx Wireless Modbus I/O - 4407ds - 1/3 Model: ZZxD-Nx-xR series Wireless Modbus I/O Modular and Customizable Wireless Replacement Introduction Wireless Modbus I/O - flexible enough to fit your applications. Zlinx plug-n-play modular units from B&B Electronics combine traditional Modbus RTU remote analog and discrete I/O with built-in wireless connectivity - reducing cost, simplifying installation and support. Wireless RTU serves as Modbus slave RTU in radio-based SCADA systems, or as a peer-to-peer communication platform. Features Easy installation conserves panel space (versus panel mount modems). DIN Rail Package Short, Medium, Long range. Dont spend more money on longer distance radios if you dont 3 Ranges Available need the distance. Active Repeaters Place I/O modules where they need to go, by the sensors. With repeater built-in functionality (-MR and -LR models only), you can build up a security path for all your critical communications. Modular Customize it to your application. Just snap on your I/O and you re ready to go. 10-48 VDC Power Input Rugged input power circuit allows insertion to most control power configurations. Can utilize industrial power supply. Wide Temperature/ Meets most indoor or outdoor applications. Rugged circuitry prevents signal degradation versus lower temperature rated wireless devices. Industrial Grade Interface using industry standard Modbus protocol. Connect to Wonderware, Labview or other Modbus Compatible Modbus compatible software. Allows data to be brought directly into most PLC systems. Base Modules Model No. Frequency Radio RF Range I/O (indoor/outdoor with included antenna) Power DI DO AI AO ZZ24D-NA-SR 2.4 GHz 100 mW Up to 91 m(300ft)/Up to 1.6 km (1 mi) 2 2 2 2 ZZ24D-NB-SR 2.4 GHz 100 mW Up to 91 m (300 ft) /Up to 1.6 km (1 mi) 4 4 0 0 ZZ24D-NA-MR 2.4 GHz 50 mW Up to 183 m (600 ft)/Up to 4.8 km (3 mi) 2 2 2 2 ZZ24D-NB-MR 2.4 GHz 50 mW Up to 183 m (600 ft)/Up to 4.8 km (3 mi) 4 4 0 0 ZZ9D-NA-MR 900 MHz 100 mW Up to 457 m (1500 ft)/Up to 11.3 km (7 mi) 2 2 2 2 ZZ9D-NB-MR 900 MHz 100 mW Up to 457 m (1500 ft)/Up to 11.3 km (7 mi) 4 4 0 0 ZZ9D-NA-LR 900 MHz 1W Up to 914 m (3000 ft)/Up to 22.5 km (14 mi) 2 2 2 2 ZZ9D-NB-LR 900 MHz 1W Up to 914 m (3000 ft)/Up to 22.5 km (14 mi) 4 4 0 0 I/O Expansion Modules Model No. Digital Inputs Digital Outputs Analog Inputs Analog Outputs ZZ-8DI-DC 8 ZZ-8DO-T 8 ZZ-4DI4DO-DCT 4 4 ZZ-4AI 4 ZZ-4AO 4 ZZ-2AI2AO 2 2 ZZ-8DO-R 8 (relays) ZZ-4RTD1 4 (RTD) International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 www.bb-elec.com orders bb-elec.com support bb-elec.com European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland www.bb-europe.com orders bb-europe.com support bb-europe.com +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS Zlinx Wireless Modbus I/O - 4407ds - 2/3 Software Options Model No. Description ZZ-PROG1 Programming module with cable ZZ-PROGKIT Programming module, cable and software CD Specifications Operating Systems Supported: Windows ME/98/2000/XP Dimensions: 1.15 x 3.65 x 5 in (2.92 x 9.27x 12.7 cm) Expansion Feature: 1 base module and up to 6 expansion modules Radio Properties Short Range (SR) Option: Up to 300 ft indoors / 1 mile outdoors (LOS) Medium Range (MR) Option: Up to 1500 ft indoors / 7 miles outdoors (LOS) Long Range (LR) Option: Up to 3000 ft indoors / 14 miles outdoors (LOS) Antennas: For 2.4 GHz models: 4.25 inch omni-directional rubber duck antenna. PN: ZZ24D-ANT1 For 900 MHz models: 6.5 inch omni-directional rubber duck antenna. PN: ZZ9D-ANT1 (RPSMA connector for db gain antennas) LED Indicators Receive Signal Strength Indicator: Tri-color LED (Off = no signal, Red = weak, Yellow = OK, Green = Strong) RF Data Indicator: Green LED (blinks with TD or RD data traffic, Off = no data traffic) Local Bus Data Indicator: Green LED (blinks with TD or RD data traffic, Off = no data traffic) Power Indicator: Red LED I/O Connectors: Removable screw terminal (2, 4 or 8 position) block, 3.5 mm spacing Digital Inputs Voltage Range: 0 to 48 VDC Low Voltage (0): 0.8 V maximum High Voltage (1): 4.0 V minimum Pull up/down current: 38 uA Frequency Input: Two DI inputs per module software selectable as Frequency Counters, 0 to 5 kHz range Digital Outputs Voltage Range: 10 to 45 VDC (for sourcing outputs), 0 to 48 VDC (for sinking outputs) Open Source: 40 mA per output Analog Inputs/Outputs Ranges: 0 to 10 VDC or 0 to 20 mA Resolution: 12 bit Input Accuracy: 0.2 % full scale reading typical Output Accuracy: 0.27 % full scale reading typical AI Load Resistance: 100 Mega Ohms when configured for voltage input 250 Ohms when configured for current input AO Max Output Current: 1 mA when configured for voltage output AO Max Load: 450 Ohms when configured for current output Input Protection: Overvoltage to 2x max input voltage Power Supply Voltage Requirements: Sourcing modules: 10 VDC to 46 VDC, 24 VAC 10% Sinking modules: 10 VDC to 48 VDC, 24 VAC 10% Power Supply: Not included Base Module Power Connector: Removable screw terminal (2) block, 3.5 mm spacing Relay Outputs Number of relays: 8 Type: C (normally open and normally closed) Output Connection: 3.5mm removable terminal block (2 per output) Common connection: 3.5mm removable terminal block (1 per bank of 4 output) Ratings: 250VAC 8A, 30VDC 5A (maximum per bank of 4 as grouped on the label) RTD Inputs Number of RTD: 4 Wire configuration: 2, 3, and 4 wire Type: PT100*, PT1000*, Cu10** *Optimized for temperature coefficient of 385 **Optimized for temperature coefficient of 427 Input Connection: 3.5mm removable terminal block (4 per output) Temperature range: PT100 = -200 to 650C PT1000 = -200 to 100C Cu10 = -100 to 260C Resolution: 0.1C across -40 to 85C Accuracy 25C: 0.5C typical Accuracy -40 to 85C: 2.0C maximum International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 www.bb-elec.com orders bb-elec.com support bb-elec.com European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland www.bb-europe.com orders bb-europe.com support bb-europe.com +353 91 792444 Fax +353 91 792445 PRODUCT INFORMATION B&B ELECTRONICS