Data Sheet Bench LCR Meter Model 891 The 891 is a compact, precise, and versatile LCR Features & Benefits The instruments convenient bin sorting function meter capable of measuring inductors, capacitors, enables quick sorting of components in different Compact 2U half-rack form factor with 4.3 and resistors at DC or from 20 Hz to 300 kHz. bins defined by the user. A linear and logarithmic color display The instruments 2U half-rack form factor is sweep function is also provided to characterize suitable for the bench or rack mount installation. components over any range of frequencies from 0.05% best impedance accuracy A large color display with all important parameters 20 Hz to 300 kHz. Measurement parameters include: and measurements visible on one screen makes C/L/R/G/B/Y/D/Q//DCR this meter easy to operate. Standard USB, GPIB, and LAN interfaces Fully adjustable test frequency from 20 Hz to enhance your productivity by providing remote 300 kHz with 4-digit resolution control capabilities to perform daily operations 0.5 Vrms and 1 Vrms selectable test levels in production, quality control, and laboratory environments. 300-point frequency sweep function Bin sorting function - 9 primary bins with a secondary and out-of-spec bin Model 891 Adjustable measurement speed for fast readout or better accuracy Best accuracy 0.05% Standard USB, GPIB, and LAN interface Test frequency 20 Hz - 300 kHz for remote control Save/recall up to 100 setups including 990 Test levels 0.5 Vrms and 1 Vrms selectable measurements and screenshots Measurement parameters C/L/R/G/B/Y/D/Q//DCR Technical data subject to change www.bkprecision.com B&K Precision Corp. 2015Bench LCR Meter Model 891 Front panel USB host port 4.3 color display Softkeys Local key Numeric keypad USB host port Connect your USB flash drive to conveniently store and recall configurations, measurements, and sweep test results. Arrow keys Save/Recall keys Measurement terminal Flexible test accessories Power switch Menu keys Each unit comes standard with Kelvin clip test leads for 4-wire measurements. The optional test fixture allows users to conveniently measure axial and radial lead type components. Intuitive user interface Easily change test parameters using the menu-driven front panel keypad and easy-to-read color LCD. Convenient function keys let users quickly save/recall up to 100 measurement setups. Included Kelvin clips (TL 889A) Optional Test Fixture (TL89F1) Rear panel LAN interface GPIB interface Chassis ground SCPI-compliant programming The LCR meter can be programmed remotely via the USB (virtual COM), GPIB, and LAN interface using SCPI commands. USB interface AC line Fuse capsule AC input selection switch 2 www.bkprecision.com