EZ-LIGHT K90L Datasheet Large one to five color indicator with flashing input control Bright, uniform indicator light All models have flashing input control Models are available with up to five colors in one device Rugged IP67-rated design 12 to 30 V dc operation Model No. of Colors Colors Input Connection K90LGPQ Green K90LRPQ Red K90LYPQ Yellow PNP K90LBPQ Blue K90LWPQ White 5-pin M12/Euro-style Quick 1 Disconnect K90LGNQ Green K90LRNQ Red K90LYNQ Yellow NPN K90LBNQ Blue K90LWNQ White Model No. of Colors Colors Connection Input K90LGRPQ 2 Green, Red 5-pin M12/Euro-style Quick Disconnect K90LGYRPQ 3 Green, Red, Yellow PNP K90LBGYRPQ 4 Blue , Green, Yellow, Red 8-pin M12/Euro-style Quick White, Blue, Green, Yellow, Disconnect K90LWBGYRPQ 5 Red K90LGRNQ 2 Green, Red 5-pin M12/Euro-style Quick Disconnect K90LGYRNQ 3 Green, Red, Yellow NPN K90LBGYRNQ 4 Blue , Green, Yellow, Red 8-pin M12/Euro-style Quick White, Blue, Green, Yellow, Disconnect K90LWBGYRNQ 5 Red Integral quick disconnect models are listed a mating cordset is required (see Accessories on page 4). To order the 150 mm (5.9 in) PVC pigtail with quick disconnect models, replace Q with QP in the model number, for example, K90LGYRQP. To order the 2 m (6.5 ft) cable modes, omit the suffix Q in the model number, for example, K90LGYR. Original Document 14 December 2016 181765 Rev. D 181765 EZ-LIGHT K90L Specifications Supply Voltage and Current Construction 12 to 30 V dc Base and dome: Polycarbonate 475 mA maximum at 12 V dc Connections 175 mA maximum at 30 V dc Integral 5-pin M12/Euro-style male quick disconnect (QD) Integral 8- Supply Protection Circuitry pin M12/Euro-style male quick disconnect (QD) 150 mm (6 in) PVC cable with a 5-pin M12/Euro-style male quick disconnect (QD) 150 Protected against reverse polarity and transient voltages mm (6 in) PVC cable with a 8-pin M12/Euro-style male quick Input Response Time disconnect (QD) or 2 m (6.5 ft) unterminated PVC-jacketed cable 75 ms maximum depending on the model Adjustments Indicators 1.6 Hz flash rate via flash input wire 1 to 5 colors, depending on the model Light Characteristics Only one color can be on at a time. The higher color number overrides the lower color number. Color Typical Wavelength or Typical Intensity Environmental Rating Color Temperature IEC IP67 Enclosure UL Type 4X, 13 Red 625 nm 65 lumens Vibration and Mechanical Shock All models meet Mil Std. 202F requirements. Method 201A (vibration: Yellow 590 nm 35 lumens 10 Hz to 60 Hz max., double amplitude 0.06 inch, maximum Green 525 nm 150 lumens acceleration 10G). Also meets IEC 947-5-2 requirements: 30G 11 ms duration, half sine wave. Blue 470 nm 55 lumens Operating Conditions White 60007100 K 200 lumens 40 C to +50 C ( 40 F to +122 F) Certifications Dimensions Models with Quick Disconnect Models with Integral Cable 87 mm 87 mm 3.43 3.43 M30 X 1.5 M30 X 1.5 C 20 mm L 20 mm M12 X 1 0.79 0.79 90 mm 1/2-14 NPT 3.54 C L 90 mm 1/2-14 NPT 3.54 C L C L C L C L 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 181765 Rev. D